first of all im form the philippines and i drive a mitsubishi lancer which is a mirage in the states. anyway got a turbo from a friend of mine which came from a celica. can anybody help give me advice on how i should install it.. by the way im kinda tight for budget so i was wondering if i could run it on stock pistons.. my engine is a 4g92a

 

install it inside of teh hood area of the automobile for maximum powers.

 

yeah i know.. but how much boost should i set it for a stock engine..

 

first you need to decide how you are going to tune your engine to handle the boost.
If you dont have the resources or options to tune it you wont be able to boost very much.
Your stock pistons should be fine for a moderate amount of boost, IF tuned.
search this site, everything you need is explained somewhere.

 

all of us read and read before start to ask any question . so read in this site so much and then read in most sites for turbo . then you will make a spot at the question you need to ask then we will answer you .

 

I come here years ago 2 and first ?? asked today, I still not finished reading

 

pls read all turbo and tech sections on HMT, they're good ---> full of info, or try just reading around here for a while
about 6 psi is ok, any more needs awesome tuning, depending on enginecondition

 

thanks.. and my final question is.. "where in my engine should i get the lubrication for my turbo?" or where should i tap the line in to?

 

https://www.homemadeturbo.com/forum/...?topic=13329.0

 

why did you answer that question?