HomemadeTurbo - DIY Turbo Forum - I NEED HELP BOV NO BOVING AND CREATING NO BOOST

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)

- - I NEED HELP BOV NO BOVING AND CREATING NO BOOST (https://www.homemadeturbo.com/forced-induction-7/i-need-help-bov-no-boving-creating-no-boost-3406/)

Re:I NEED HELP BOV NO BOVING AND CREATING NO BOOST

ok i figured id just go for a drive.... well it was because i didnt have my bov adjusted right... so i thought so i loosened it up and it started working.....well then i was test driving it i blew off and the head of the bov fell off and i lost the spring...... so i came back only pushing 2 psi. and blowing off every 2 seconds.. hehe ... so i found a spring i modified at 8 psi when its fully shut so i dont have to worry about loosing it again.... 8 psi is nice pulls pretty good.....still have a little oil leak but it will be gone soon thanks for all your help though.. pce

Re:I NEED HELP BOV NO BOVING AND CREATING NO BOOST

Quote:

Originally Posted by tranceminister

Try spraying soapy water on your charge pipes (if you have an intercooler) or the throttle body pipe and around the blowoff valve flange. Look for any bubbles and that will show you if theres a leak. It also might help wash off all the oil from your oil leak... ;D

ok buddy. spraying soapy water on the joints is only going to suck the soapy water into the intake. :-X