NINJA del Sol

I have a TD04H that I need to find an actuator for. My engine is not build so I need something with a 6psi setting. I was wondering if there were any vehicles that come stock with these turbos and have their wastegate at 6. Thanks

shortyz

post a WTB ad in the classifieds.

NINJA del Sol

well, I was wanting to go yard-sailing. Kind of a little dayoff adventure. That and the quest for DSM 450cc's; All in days work

shortyz

get one off a TD05h and modifiy it. jeff might have one.

NINJA del Sol

word. Are they 6psi. that's my main concern

shortyz

all u have to do is cut the actuator arm. thread it and put a long nut on it and u can adjust your boost that way.


or you can just say to hell with it and use a carb spring like jeff did once. he has a pic

NINJA del Sol

did the carb spring setup lead to a grenadation of the engine?

HMT-Admin

No, it doesnt, it actually can result in less pressure, you can set it anywhere you want 0-8psi, just depends on tension, and if it falls off, it goes back to 0.

14b wastegate should be the same as the td04 mitsu.. (not the greddy one though)

Jeff

NINJA del Sol

Thanks. How are carb springs measured, rated or Gauged? Basiclly, when I go to autozone tomorrow, do I ask for an adjustable carb spring, a 6lb carb spring or what. I know these people don't get paid enough to put up with stupid-asses; so I want to march in their with a little bit of lingo.

LUDELVR

U gave a stock t3 wastegate actuator and arm lying around. I can sell that to you for pretty cheap...only thing is that it's set to around 11-12 or something like that. It's off an old merkur