Forced Induction Custom FI Setup Questions

i killed main bearings

Thread Tools
 
Search this Thread
 
Old Mar 15, 2008 | 09:55 PM
  #1  
TwoLoudnproud's Avatar
Thread Starter
1.0 BAR
 
Joined: Nov 2006
Posts: 385
From: Nor Cali
Default i killed main bearings

Ok after coming home from the raceway wednesday night i noticed my oil pressure was under 25pis and at idol it bearly reads on the guage and when i am driving and gets about 3000rpms i get a low rattle knocking sound but i dont have any blowby out of the valve cover. so what do you guys think oil pump or piston or both? By the way i did change the oil and the filter the oil pressure went up a little but not much. My oil pressure before this happen was 25-75 now 5-50psi.
Old Mar 15, 2008 | 09:58 PM
  #2  
ghettoturbo's Avatar
1.5 BAR
 
Joined: Feb 2008
Posts: 924
Default Re: Did i blow a piston?

maybe a bearing ---- the bed...a fucked piston should have no effect on oil pressure at all
Old Mar 15, 2008 | 10:22 PM
  #3  
leed's Avatar
3.0 BAR
 
Joined: Dec 2002
Posts: 3,829
Default Re: Did i blow a piston?

What you describes sounds like a nar-nar bottom end noise. Take a quick vid of you slowy reving it up and down from idle.
Old Mar 15, 2008 | 10:26 PM
  #4  
ifly87's Avatar
3.0 BAR
 
Joined: Dec 2005
Posts: 2,081
Default Re: Did i blow a piston?

classic symptoms of a spun bearing early on, Dont plan on driving it far away from home.
Old Mar 15, 2008 | 10:35 PM
  #5  
con's Avatar
con
0.0 BAR
 
Joined: Nov 2003
Posts: 0
Default Re: Did i blow a piston?

We call that the sound of death, congrates you just made your first frosted flakes
Old Mar 15, 2008 | 10:48 PM
  #6  
TwoLoudnproud's Avatar
Thread Starter
1.0 BAR
 
Joined: Nov 2006
Posts: 385
From: Nor Cali
Default Re: Did i blow a piston?

Here a video
Old Mar 16, 2008 | 02:34 AM
  #7  
Ravage70's Avatar
3.0 BAR
 
Joined: Jan 2004
Posts: 5,933
Default Re: Did i blow a piston?

FROSTED FLAKES
Old Mar 16, 2008 | 05:11 AM
  #8  
TwoLoudnproud's Avatar
Thread Starter
1.0 BAR
 
Joined: Nov 2006
Posts: 385
From: Nor Cali
Default Re: Did i blow a piston?

---- well i pull the pan in the morning and take a look and let ypu guys know what i find.
Old Mar 16, 2008 | 11:04 AM
  #9  
BoostedBSeries's Avatar
3.0 BAR
 
Joined: Feb 2003
Posts: 1,625
Default Re: Did i blow a piston?

sounds like a spun bearing. i had one the other week in my hatch. sounded just like that. good luck swapping motors. at least F series longblocks are cheap.
Old Mar 16, 2008 | 12:01 PM
  #10  
E-b0la's Avatar
3.0 BAR
 
Joined: May 2006
Posts: 1,967
Default Re: Did i blow a piston?

run it till she blows.



All times are GMT -5. The time now is 04:54 AM.