i gto a t3/t4 hybrid set up...it has everything i need but its like i'm missing some intercooler pipin...what else could i use instead of spendin all that money for new pipin...?...plus i don't know how to hook up my FMU...and my down pipe needs to be welded on...like i have the pipe and two differant flendges...should i get them welded or should i buy a new one?...help me out

 

Spelling?

You asked that like a 13 year old teeny bopper.


Good luck!

 

http://mywebpages.comcast.net/customcoach/mandrel.html

just get the piping pieces you need.....

or go to
www.summitracing.com and pick up some piping...

at any rate that would be the cheapest "good" alternative. your other options would be to go to a local exhaust shop and get some pinch-bends welded on, or they might have mandrel-bent pieces and they could weld them together for you - but chances are that would cost more than just doing the piping yourself.

check out that first link i posted - get the pieces you need and do it yourself.

EDIT: on the downpipe, get the flanges welded on and install it yourself - that would be cheaper than buying a whole new downpipe.

 

should have did some research before you wasted money

 

Typical

 

wtf is up w/ all the noob SOS posts latley??

 

yeah...thx for all the help...

 

If I were you, I would take the advice given and ignore the bashing.. then do tons of research.

 

also i need to know the best way to but the bov on the pipes...like if i should get it welded or if there is another way to do it...i have the turbo xs...type-h-rfl bov...

 

man, it just doesn't end w/ this guy