I Give up! HELP!!!!!!!!!!!
#11
Re: I Give up! HELP!!!!!!!!!!!
alright I will do my best to explain it this time.
First, regarding the mount, my motor doesnt really vibrate much at all, that's why it never occured to me. But I remembered this last night and said what a hell, that's probably my problem. So i'm fixing that this week for sure.
As far as the botls and nuts, here it is
When I first boosted, I used 4 studs, all the same. However, If you look at this picture of my manifold, you can't put nuts on the back studs. So right now 2 can have nuts and 2 can't have nuts.
The front side. I use the inner holes, not the outer holes.
Here's the back side:
Notice how you are looking at the outer holes. The inner holes which are the rear, you can't put a nut to the bolt or stud. The runner covers up the hole from up top.
Also, when I say i went through many sets, everytime i change them and try something new, I use 4 of the same bolt or studs. I don't mix and match. I hope that made sense
First, regarding the mount, my motor doesnt really vibrate much at all, that's why it never occured to me. But I remembered this last night and said what a hell, that's probably my problem. So i'm fixing that this week for sure.
As far as the botls and nuts, here it is
When I first boosted, I used 4 studs, all the same. However, If you look at this picture of my manifold, you can't put nuts on the back studs. So right now 2 can have nuts and 2 can't have nuts.
The front side. I use the inner holes, not the outer holes.
Here's the back side:
Notice how you are looking at the outer holes. The inner holes which are the rear, you can't put a nut to the bolt or stud. The runner covers up the hole from up top.
Also, when I say i went through many sets, everytime i change them and try something new, I use 4 of the same bolt or studs. I don't mix and match. I hope that made sense
#15
Re: I Give up! HELP!!!!!!!!!!!
::OFFTOPIC: ( not intent to thread jack)
The avatar is just a pic of my turbo for my next project. I just finished piecing the kit together earlier today.
On my new website im gonna have a section for animated gif and avatars that people can download
::back ONTOPIC::
The avatar is just a pic of my turbo for my next project. I just finished piecing the kit together earlier today.
On my new website im gonna have a section for animated gif and avatars that people can download
::back ONTOPIC::
#16
Re: I Give up! HELP!!!!!!!!!!!
wow, that's an awesome drawing Speedracer32.
I could do that as you suggested, but then again; I can only do that to the front two studs/bolts. The problem becomes in teh back ones, which go out first.
Oh well, I just spot welded it in a few spots to where I'll be able to clean it extermely well next time i take it off. I put some locking washers, red locktight as usual. I'll see how it holds up this time.
Thanks for the help fellas.
I could do that as you suggested, but then again; I can only do that to the front two studs/bolts. The problem becomes in teh back ones, which go out first.
Oh well, I just spot welded it in a few spots to where I'll be able to clean it extermely well next time i take it off. I put some locking washers, red locktight as usual. I'll see how it holds up this time.
Thanks for the help fellas.
#19
Re: I Give up! HELP!!!!!!!!!!!
Originally Posted by B16CRXT
That mount you broke is juat a torque mount. I doubt thast causing your problems, but since you do have the replacement already, FIX IT!