Re: I Give up! HELP!!!!!!!!!!!
alright I will do my best to explain it this time.
First, regarding the mount, my motor doesnt really vibrate much at all, that's why it never occured to me. But I remembered this last night and said what a hell, that's probably my problem. So i'm fixing that this week for sure. As far as the botls and nuts, here it is When I first boosted, I used 4 studs, all the same. However, If you look at this picture of my manifold, you can't put nuts on the back studs. So right now 2 can have nuts and 2 can't have nuts. The front side. I use the inner holes, not the outer holes. http://www.lovefabinc.com//images/pr...orty%20002.jpg Here's the back side: Notice how you are looking at the outer holes. The inner holes which are the rear, you can't put a nut to the bolt or stud. The runner covers up the hole from up top. Also, when I say i went through many sets, everytime i change them and try something new, I use 4 of the same bolt or studs. I don't mix and match. I hope that made sense http://www.lovefabinc.com//images/pr...orty%20005.jpg |
Re: I Give up! HELP!!!!!!!!!!!
how about you buy some thread studs and weld them to the manifold
Ima have to draw a picture cause I cant explain it ;D |
Re: I Give up! HELP!!!!!!!!!!!
got carried away with the drawing
|
Re: I Give up! HELP!!!!!!!!!!!
Wow. That's a cool pic. I wish I could do that. :-\ Post that avatar of yours. I have yet to see that one up. I saw the others, but not that one.
JP |
Re: I Give up! HELP!!!!!!!!!!!
::OFFTOPIC: ( not intent to thread jack)
The avatar is just a pic of my turbo for my next project. I just finished piecing the kit together earlier today. On my new website im gonna have a section for animated gif and avatars that people can download ::back ONTOPIC:: ;D |
Re: I Give up! HELP!!!!!!!!!!!
wow, that's an awesome drawing Speedracer32.
I could do that as you suggested, but then again; I can only do that to the front two studs/bolts. The problem becomes in teh back ones, which go out first. Oh well, I just spot welded it in a few spots to where I'll be able to clean it extermely well next time i take it off. I put some locking washers, red locktight as usual. I'll see how it holds up this time. Thanks for the help fellas. |
Re: I Give up! HELP!!!!!!!!!!!
thanx man
Good luck this round let us know how it turns out ;) |
Re: I Give up! HELP!!!!!!!!!!!
That mount you broke is juat a torque mount. I doubt thast causing your problems, but since you do have the replacement already, FIX IT!
|
Re: I Give up! HELP!!!!!!!!!!!
Originally Posted by B16CRXT
That mount you broke is juat a torque mount. I doubt thast causing your problems, but since you do have the replacement already, FIX IT!
|
Re: I Give up! HELP!!!!!!!!!!!
how about safety wiring the nuts so they don't back off????????
doubt anyone here besides knows how to do it though :( |
All times are GMT -5. The time now is 02:17 PM. |
© 2024 MH Sub I, LLC dba Internet Brands