Howdy! New here... need opinions...
New here... found this site thru a link on my one forum about the welded compressor wheel. Funny stuff! Anyway, I have been working long and hard on my latest version of my free turbo calculator and could use some input. There are still some final touches needed here and there...
Let me know what you think! http://www.---------------/turbocalc/ V/R Frank |
Re: Howdy! New here... need opinions...
i think you should post some porn noob
|
Re: Howdy! New here... need opinions...
I hope you arent the welcome wagon because your being a dick.
|
Re: Howdy! New here... need opinions...
Most people are here. That said, you've created a fantastic tool. Thank you for that.
|
Re: Howdy! New here... need opinions...
it is a nice tool
but none the less every noob is required to post porn and pics of his/her ride the longer you wait the more flaming youll get |
Re: Howdy! New here... need opinions...
Originally Posted by fkatzenb
I hope you arent the welcome wagon because your being a dick.
Enjoy your stay! |
Re: Howdy! New here... need opinions...
Wow, that was quite amuzing actually. At least you guys are honest. I can't post any porn pics, but I will post a picture of my ride... the ride that doesn't run right now...
http://www.------------.com/forums/p...m/Img_4219.jpg http://www.---------------/frank/gal...a/Img_2704.jpg http://www.---------------/frank/gal...a/Img_2672.jpg http://www.---------------/frank/gal...-installed.jpg http://www.---------------/frank/gal...a/Img_2787.jpg |
Re: Howdy! New here... need opinions...
Originally Posted by fkatzenb
Wow, that was quite amuzing actually. At least you guys are honest. I can't post any porn pics, but I will post a picture of my ride... the ride that doesn't run right now...
http://www.---------------/frank/gal...a/Img_2672.jpg |
Re: Howdy! New here... need opinions...
It is indeed an EGR for each runner. As for the turbo, it is currently a T04E 50trim with a T3 cover and T3 turbine with a StageII wheel. It sucks, but the head flows so well that you don't notice it. I had a SC6152S to go on, but sold that and changed my mind and have a GT3076R with a Chrysler turbine housing to go on the car, but that maybe on hold. I have some bad vibs that I can't get rid of and I know it is block related or the block was machined wrong. I am going to pull it out and part the engine and go with a 16v 2.4L I already have.... cheaper and less costly to fix. Here are some turbo pics...
http://www.---------------/frank/gal...a/Img_2740.jpg http://www.------------.com/forums/p...m/Img_4243.jpg Frank |
Re: Howdy! New here... need opinions...
Originally Posted by 78NOVA
is that an egr or air/fuel ratio setup for each individual runner? looks tits though. the car is clean and better be boosted.......no joke.......or should i say will be boosted or banned for life!!!!
|
Re: Howdy! New here... need opinions...
Damn nice setup. Always been a fan of the 2.2l and 2.5l. Can a make a suggestion on your setup though?
Ditch that POS RFL valve. Trust me it will cause you headaches in the future because they are notorious for leaking and the ching chong meow spring inside getting weak. At the very least please put a different spring in it. Thanks. http://www.phun.org/galleries/aria_g...iovanni_06.jpg http://www.phun.org/galleries/aria_g...iovanni_05.jpg http://www.phun.org/galleries/aria_g...iovanni_01.jpg http://www.phun.org/galleries/aria_g...iovanni_07.jpg http://www.phun.org/galleries/aria_g...iovanni_08.jpg http://www.phun.org/galleries/aria_g...iovanni_18.jpg http://www.phun.org/galleries/aria_g...iovanni_32.jpg http://www.phun.org/galleries/aria_g...iovanni_35.jpg |
Re: Howdy! New here... need opinions...
I have always had a soft spot for those engines. What ecu are you running?
|
Re: Howdy! New here... need opinions...
that ---- is hot
|
Re: Howdy! New here... need opinions...
Good job on the calculator and the Mopar looks good those are a under respected platform these days.Welcome dogballs.
|
Re: Howdy! New here... need opinions...
Thanks guys.
Alot of things are being rethought when I go 2.4L. I am currently running a chipped ECU and I have an EEPROM burner with the communities free tuning program... gotta love grassroots and the people at TM. Let me know if you guys see maps that arent on there and I will see what I can do. |
Re: Howdy! New here... need opinions...
Nice setup!! :)
|
Re: Howdy! New here... need opinions...
Originally Posted by fkatzenb
I can't post any porn pics, but I will post a picture of my ride...
your just anothere bitch that comes here expecting open doors and a welcome mat untill you go fuuck your bitch of a momj and post porn you can suck my cock and call it candy ill fuckern leave a mush room on your fore head bitch |
Re: Howdy! New here... need opinions...
Glad I don't give a damn what you think...
|
Re: Howdy! New here... need opinions...
Originally Posted by Atticus
we dont give a ---- about your ride
your just anothere bitch that comes here expecting open doors and a welcome mat untill you go fuuck your bitch of a momj and post porn you can suck my cock and call it candy ill fuckern leave a mush room on your fore head bitch |
Re: Howdy! New here... need opinions...
I check out ------------ all the time and I don't even own 1. Nice car. PLEASE ignore the stupidity...
|
Re: Howdy! New here... need opinions...
Thanks!
Dude, you should post up your car there in the Other Vehicles section... we love to hear about other cars!!!! |
Re: Howdy! New here... need opinions...
Originally Posted by widebody93
You sir are a ------- moron, Its a sweet car and with alot of sweet idea's "POST PORN" you need to get off that ---- and grow the ---- up or go here and enjoy yourself with that bottle of ---- lube to your side that BITCHASSCRACKER left behind www.youporn.com
|
Re: Howdy! New here... need opinions...
The flaming and hazing exists more or less to keep the honda-tech wannabe ------- retards and other idiots who ask questions before checking the stickes, OUT of the site. This guy has obviously done his own work and research to get where he is. Props to a nice build.
I cant help but think that bronco in the background (5.0? 5.7?_) needs a turbo setup....flip some manifolds and Megasquirt that bitch!!! :6 |
Re: Howdy! New here... need opinions...
Originally Posted by Hitchhikkr
The flaming and hazing exists more or less to keep the honda-tech wannabe ------- retards and other idiots who ask questions before checking the stickes, OUT of the site. This guy has obviously done his own work and research to get where he is. Props to a nice build.
I cant help but think that bronco in the background (5.0? 5.7?_) needs a turbo setup....flip some manifolds and Megasquirt that bitch!!! :6 But I won't be doing anything till I get my boost/n2o/alky controller prototyped and 20 controller run done. I also need to get the daytona running again with the soon to be new engine and Megasquirt. Frank |
Re: Howdy! New here... need opinions...
|
Re: Howdy! New here... need opinions...
This might be worth looking at, or it will look like tetris compared to the OP's tool.
http://---------------------------/DIYturboselect.shtml |
Re: Howdy! New here... need opinions...
You can't win. LOL.
My first two calculators were in excel, but so many people complained because they didnt have excel. You can see them here: http://www.---------------/turbocalc/...bo_v2_beta.xls So that is why we are were we are at now. I did just make this.... simple library for the maps. :) http://www.---------------/turbocalc/map.php Frank |
Re: Howdy! New here... need opinions...
nice ride
|
Re: Howdy! New here... need opinions...
Originally Posted by bigluelok
nice ride
j/k not really |
Re: Howdy! New here... need opinions...
What car is the 16v 2.4 engine comming from?
|
Re: Howdy! New here... need opinions...
Nice build good work. Now post more pic's.
|
Re: Howdy! New here... need opinions...
Originally Posted by Dive_Miguel
What car is the 16v 2.4 engine comming from?
|
All times are GMT -5. The time now is 01:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands