Sorry for the noob like question guys, but I figured its worth it to ask before I take the breaker bar to unnecessary bolts.

The t3 I got off ebay came with a nice surprise. Two bolt stems stuck in the turbine housing outlet's side, so I can't bolt a downpipe on correctly. I tried using power out bits, and guess what one of them broke off inside the stem. So now I can't even drill the one out if I wanted to go that route. The machine shop wants over $100 so I figured I would just buy a new turbine housing for it. Think thats an ok solution? So the question is, can you explain how to get the housing off, or point me in the direction of a writeup on it?

 

BTW, I read Jeff's write up how to rotate the center housing. Can I take the whole turbine housing off though doing that method or will it just let me rotate.

 

where did you read this writeup that you speak of. i tried searching for it. i guess im not as search savvy as i thought. i need to rotate mine about 80 degrees, and i dont know how to do it.

 

Its in the faq at the top of this forum. https://www.homemadeturbo.com/forum/...threadid=13035

No one that knows the answer to my q has read this thread yet?