how much ohms for 450
#3
Re: how much ohms for 450
Originally Posted by morasse
how much ohms i need to place on each injector for a 450cc black top i dont whant to use a resistor box so
tanks a lot
tanks a lot
Second your an idiot. This is not honda-tech. We arent going to cater to your every whim or worship your post count. Die.
#6
Re: how much ohms for 450
Originally Posted by Zeniceguycrx
just use one AA battery on each injector
Originally Posted by sailman
10 watt 10 ohm on each injector
Next time search.
#8
Re: how much ohms for 450
Originally Posted by reactone
Just get a resistor box. Its a lot easier and it looks really clean.
6.8 ohm resistor box free off of many Honduhs, Toyotas, Mitsubishis > clusterfuck blacktape and fragile wiring disaster of individual inline 10 ohm resistors.
#9
Re: how much ohms for 450
just make sure if you're doing the ghetto inline resistors that JD doesnt reccoment (nor does anyone really unless you're good at wiring and do it properly)
wire them in SERIES!!! not in parrallel like some nog i saw the other day
The only way to actually splice the individual resistors inline and have it look decent IMO is to cut out a section of the wire (only one, either positive of negative) and solder the resistor in so its part of the wire and the wire all looks teh same legnth and then ehat shrink over top
but thats a lot of work... so run a resistor box!
wire them in SERIES!!! not in parrallel like some nog i saw the other day
The only way to actually splice the individual resistors inline and have it look decent IMO is to cut out a section of the wire (only one, either positive of negative) and solder the resistor in so its part of the wire and the wire all looks teh same legnth and then ehat shrink over top
but thats a lot of work... so run a resistor box!