How do you rotate the center section on a 14b?
10-09-2008, 04:33 PM
#4
1.5 BAR
Join Date: Oct 2006
Posts: 964
Re: Water/Oil Inlets/Outlets, can they be swapped?
Originally Posted by fliphkd720
alright yeah i wasn't thinking. Thanks
no ----
you might try clocking the center section, all it takes is to remove the dowell that locates the exhaust housing
10-09-2008, 06:38 PM
#7
0.0 BAR
Thread Starter
Join Date: Jun 2007
Posts: 48
Re: Water/Oil Inlets/Outlets, can they be swapped?
alright i admit it was a stupid ------- question, i just thought of it sitting here so i decided to ask about it, my bad
but moving on, for real. I've had the clamp off the center section, i've had the cold side of the turbo loose, but i can't rotate the whole thing becasue the way the wastegate is attached, so i would really like to know what i need to do to rotate the center section. It would be highly appreciated
but moving on, for real. I've had the clamp off the center section, i've had the cold side of the turbo loose, but i can't rotate the whole thing becasue the way the wastegate is attached, so i would really like to know what i need to do to rotate the center section. It would be highly appreciated
10-09-2008, 07:07 PM
#10
0.0 BAR
Join Date: Dec 2005
Location: Casper Wyo.
Posts: 0
Re: Water/Oil Inlets/Outlets, can they be swapped?
maybe read this will help you : https://www.homemadeturbo.com/forum/...?topic=13035.0
may want to get in the habit of using the search button first.
may want to get in the habit of using the search button first.
