How do I control Boost level on an internal wastegated turbo?
 

How does this work. WIth external I guess you get an adjustable wastegate, but how to you change the one built into the turbo.

Re:How do I control Boost level on an internal wastegated turbo?
 

With a hammer to the actuator rod or a boost controller

Re:How do I control Boost level on an internal wastegated turbo?
 

so a mbc is a needed component for a diy system. Which brand is good and cheap for these

Re:How do I control Boost level on an internal wastegated turbo?
 

no wastegates/actuators set boost to a perdetermined level usually 8psi. To raise it over that mark you need a boost controller

Re:How do I control Boost level on an internal wastegated turbo?
 

ok. That makes sense, are most of them 8 psi or do they vary depending on the turbo used?

Re:How do I control Boost level on an internal wastegated turbo?
 

vary with each turbo

Re:How do I control Boost level on an internal wastegated turbo?
 

Ok well howdo you lower the boost??

Re:How do I control Boost level on an internal wastegated turbo?
 

make a hole in it ;)

Re:How do I control Boost level on an internal wastegated turbo?
 

link to a DIY MBC: http://www.geocities.com/chmwatson/FAQs/mbc.html

Re:How do I control Boost level on an internal wastegated turbo?
 

bend the rod makes it shorter and lowers boost. drop a boost controller in there if you want to raise it.

Re:How do I control Boost level on an internal wastegated turbo?
 

You sure about that?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:How do I control Boost level on an internal wastegated turbo?
 

NO...

Re:How do I control Boost level on an internal wastegated turbo?
 

The length of the actuator arm is inversly proportional to the amount of boost you will see. Increase the length to lower the boost, decrease the length to raise the boost. Look in the FAQ for ways to lengthen the arm, get a boost controller if you want to raise the boost past "stock" levels.