HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   How difficult is it rebuilding a turbo? (https://www.homemadeturbo.com/forced-induction-7/how-difficult-rebuilding-turbo-30741/)

stillnoturbo 11-29-2004 07:55 PM

How difficult is it rebuilding a turbo?
 
I can get a Garrett t3 that was pulled off a Ford turbo chicken from a friend for 20 bucks. It could probably be used the way it is but it could use a rebuild since it does have quite abit of shaft play on it. I've looked around for rebuild kits and there pretty cheap like under 100. Now my question is how difficult is it replacing everything? I've torn down my old IHI and cleaned it up and had the exhaust housing bead blasted and cleaned and polished the compressor housing but never took the center section apart. Should I just send it out or get a new center section or just do it myself? I'm just worried it's gonna be out of balance if I do and take it all apart and it's not gonna last long. Help!

Atheist 11-29-2004 09:16 PM

Re:How difficult is it rebuilding a turbo?
 
The bearings need to be pressed, and it should be balanced as well. If you are not worried about shaftplay, only gaskets, you can do it yourself.

www.cheapturbo.com rebuilds.

stillnoturbo 11-30-2004 08:12 AM

Re:How difficult is it rebuilding a turbo?
 
Anyone know how much it runs to send it out to be rebuilt?

delsol95 11-30-2004 09:51 PM

Re:How difficult is it rebuilding a turbo?
 
dont now what other shop cost but turbo place around me wanted 180 for parts and 350 for labor. Sounds kinda high but they do good work.

Ravage70 11-30-2004 11:17 PM

Re:How difficult is it rebuilding a turbo?
 
buy a center cartridge from anthony

stillnoturbo 12-01-2004 06:48 AM

Re:How difficult is it rebuilding a turbo?
 
And who is this anthony fellow you speak of?

ThaOnlyStunna03 12-01-2004 10:04 PM

Re:How difficult is it rebuilding a turbo?
 
speedpartsrus.com thats his site also forum sponser I'm guessing

Honda16hb 12-01-2004 10:19 PM

Re:How difficult is it rebuilding a turbo?
 
I took a turbo apart and put it back together and it makes spooling noises when I ---- with the throttle when my car actually starts, so I'm guessing I did it right, so if I can do it you can too.

pa2play 12-18-2004 05:57 PM

Re:How difficult is it rebuilding a turbo?
 
you can write a guy named nick at turbostuff@juno.com he has good prices on rebuild turbo stuff

stillnoturbo 12-19-2004 11:50 AM

Re:How difficult is it rebuilding a turbo?
 
Turbo is gone now and is SSL2K's problem err.. turbo I mean ;D He knows it has shaftplay so he knows what he's getting.


All times are GMT -5. The time now is 11:26 PM.


© 2024 MH Sub I, LLC dba Internet Brands