HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   How Can I Get 600AWHP From a Stealth ???? (https://www.homemadeturbo.com/forced-induction-7/how-can-i-get-600awhp-stealth-66868/)

unsivil_audio 08-17-2006 04:45 PM

Re: How Can I Get 600AWHP From a Stealth ????
 

Originally Posted by Joseph Davis
Same transmission as 4G63 powered DSM. Poop. Don't listen too much to the weight haters; all DSM are slow, but you are no worse off than GVR4 as far as weight goes.

Doesnt make it one of the good ones (in fact probably is one of the earlier crappy ones; based on there reputation). There are very few DSM parts that are good. And not much of it is interchangable. For example, we were switching out parts on my friends 90 GSX trying to figure out a drivetrain issue. We bolted up a 91 t-case, no problem. Hooked everything up and took it for a drive. Same problem and a new one; we had a tick coming from the rear end whenever the car was under power. Or so we thought. So we switched out rear ends for a known good LSD rear end. Mistake. There was a whine from that rear end; took it home. My dumbass friend forgot to fill the rear end or even check it for that matter (it was his car). Fill it up and take it for a drive, same noise but quieter now. We're stumped. I crawl under the car on jack stands and start spinning the driveshaft by hand. Its notchy as we spin it. Figuring the rear end is fucked from running without fluid, we switch it back to the one that came on the car. Take it for a drive, same ticking. I crawl back under the car and spin the driveshaft again. WTF? Its still notchy. Anyways, long story short. We drop the center diff. Turns out the input shaft is, I ---- you not, ~1mm smaller but same spline count as the output on the transmission. Also after some research, I found out the LSD rear end was off an automatic, which you guessed it, have a different ratio than the manuals. How gay.

Anyways thats not the only hell I've had with mitsubitchi's, just one instance. Also, a GVR4 is no where near what a 3000gt is. 3200lbs according to edmunds, which puts it right in eclipse territory.

JFoster 08-17-2006 05:54 PM

Re: How Can I Get 600AWHP From a Stealth ????
 
Ok, I personally am a turbo honda guy ... '95 LS-T ... but he is a Mitsu lover and currently drives an NA FWD 3000gt daily. Too big of a car for me but he likes em, and his NA FWD is faster than I expected ... he regularly takes ricers and on HWY could pull away from my stock '01 GSR.

He is getting the car cheap as it needs a clutch so it will get a beefier unit upon arrival. The car does have a new motor I am told.

With a claimed 320hp stock it doesn't seem like ~550 or so would be such a strech ....


Originally Posted by Joseph Davis
Same transmission as 4G63 powered DSM. Poop. Don't listen too much to the weight haters; all DSM are slow, but you are no worse off than GVR4 as far as weight goes.

Dunno about max power you can get out of that engine reliably; it wasn't so long ago that Honduhs couldn't take more than 6-8 psi and 250 whp was like whoa. It's just not a developed platform, so prepare to make some semi-serious basic errors.

You're probably need two Walbro 255 in parallel to hit 600 awhp, and expect to have to upgrade the feed line.

...UD? :-\

I searched the Stealth/3000GT forums and you're definately right, this platform is painfully under developed. UD ??? as in wire up a honda ECU to run the motor? Thought about that but seems like a different distributer set up... and can't run a honda dist as I need 6 plug wires ;D thoughts on possible way to make this work ????

Originally Posted by Schister66
you're not ready to make that kind of power because you said big, but cheap turbo....if you're going to cheap out on the turbo, the whole setup is doomed because who knows what other important part you'll half ass....600awhp isn't going to be cheap so give it up

WTF? ??? am I in the wrong forum ? I thought HMT was all about big horse power with small budget ?

Seriously, there has to be a turbo in production thats close enough to the right size for a potent single turbo conversion without the $1k+ price tag of the super ballin Supra crowd.

I am lookin for help, not haters .... I can find a DSM hater anywhere ...

darksol2005 08-17-2006 06:07 PM

Re: How Can I Get 600AWHP From a Stealth ????
 
ur not gonna make 600 horse out of a stealth on the cheap. twin walbros, upped line, big injectors, and a GOOD stand alone at the minimum. boss's stealth is makin 780 w/ a built ass motor, AEM, fuel system described above, lots of head work/valve train work, custom intake mani, custom IC pipes, huge twin sidemounts, and a 50 shot

SkunT 08-17-2006 06:54 PM

Re: How Can I Get 600AWHP From a Stealth ????
 
hope your pockets are as big as your goals
http://www.dynamicracing.com/customer/home.php

JFoster 08-17-2006 06:56 PM

Re: How Can I Get 600AWHP From a Stealth ????
 

Originally Posted by darksol2005
ur not gonna make 600 horse out of a stealth on the cheap. twin walbros, upped line, big injectors, and a GOOD stand alone at the minimum. boss's stealth is makin 780 w/ a built ass motor, AEM, fuel system described above, lots of head work/valve train work, custom intake mani, custom IC pipes, huge twin sidemounts, and a 50 shot

Ok well we want to shoot for 600 and settle for .... what ever it makes when its done ... which I would expect to be substantially more than the 320 stock # ... a 200hp gain would be acceptable ...

So, twin walbros ... inlines?

800-1000cc injectors ... anyway to get something like that from an existing vehicle? Rather than RC$$$$$? Cutom IM with 12 injectors maybe??? Other ideas?

Whats comparable to AEM ?? MegaSquirt ??

JFoster 08-17-2006 07:00 PM

Re: How Can I Get 600AWHP From a Stealth ????
 

Originally Posted by junkyard racer
hope your pockets are as big as your goals
http://www.dynamicracing.com/customer/home.php

Nope, don't have money like that. But the good news is we don't expect 9s ... 11s would be nice though ...

darksol2005 08-17-2006 07:42 PM

Re: How Can I Get 600AWHP From a Stealth ????
 
dude, like we keep trying to tell you, ur not gonna do it on the cheap unless you want to be fixing something else every other day

JFoster 08-17-2006 07:53 PM

Re: How Can I Get 600AWHP From a Stealth ????
 

Originally Posted by darksol2005
dude, like we keep trying to tell you, ur not gonna do it on the cheap unless you want to be fixing something else every other day

Yeah, thats pretty much his style.

JDMFantasy2K 08-17-2006 07:56 PM

Re: How Can I Get 600AWHP From a Stealth ????
 
1. steal lamborghini murcilago, diablo vt, etc
2. transplant stealth body, onto lamborghi chasis
3. drive like homo

JFoster 08-17-2006 08:00 PM

Re: How Can I Get 600AWHP From a Stealth ????
 

Originally Posted by JDMFantasy2K
1. steal lamborghini murcilago, diablo vt, etc
2. transplant stealth body, onto lamborghi chasis
3. drive like homo

Well ... thats the most helpful post so far ...no lambos here in podunk though...


Anybody know how we can get bigger injectors into this car other than just buying aftermarket ones?


All times are GMT -5. The time now is 07:56 AM.


© 2024 MH Sub I, LLC dba Internet Brands