HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   hondata intake manifold gasket? (https://www.homemadeturbo.com/forced-induction-7/hondata-intake-manifold-gasket-28333/)

SkunT 10-18-2004 01:59 PM

hondata intake manifold gasket?
 
I dont know if this goes in the FI section or the Hybrid section...but-


http://www.honda-tech.com/zerothread?id=951429

Im reading on these hondata intake manifold gaskets and finding that they lower the intake manifold temps by almost 60 degrees.

anyone used these or...


$60 for a gasket kinda seems a little steep but it miht be worth it IMO. I am also seeing pro-fab for around $40. both have there pro's and con's, some people sayin they dont line up, some people say they line up great!

whats the HMT input?


also...good info.
http://www.honda-tech.com/zerothread?id=1008599

projekteg 10-18-2004 02:12 PM

Re:hondata intake manifold gasket?
 
wow noob, wasn't there a thread just like this about two weeks ago ::)

















;D heat soak is pretty detrimental to power loss, i suggest anything that helps even a little. i lost 12 whp on back to back runs on the dyno b/c of heat soak. i've heard they work good, they do what they were designed for, some people don't think it's worth it, but it does what it does and i think it's worth it.

SkunT 10-18-2004 02:46 PM

Re:hondata intake manifold gasket?
 
when i begin my "great D build" i am thinking about a hondata intake mani gasket. I believe after reading the threads on honda-tech.com I will get one.


and where is that thread projekteg? its not on the 5 pages back I went through...



MikeJ-2009 10-18-2004 04:13 PM

Re:hondata intake manifold gasket?
 
Local HMT member Tony (sikocivic) is working on making these gaskets. Should be a month or so and he'll have them out. He's working on them now.

SkunT 10-18-2004 04:30 PM

Re:hondata intake manifold gasket?
 

Originally Posted by Stealthmode
Local HMT member Tony (sikocivic) is working on making these gaskets. Should be a month or so and he'll have them out. He's working on them now.


perfect. i will need one around then.

91civicZ6 10-18-2004 05:33 PM

Re:hondata intake manifold gasket?
 
isnt the hondata gasket just gasket material surrounding a plastic core?

Shockazooloo 10-18-2004 05:49 PM

Re:hondata intake manifold gasket?
 
The hondata gasket is made of some type of special plastic that doesn't transfer heat from the head to the manifold. I'm not sure on what type of plastic it is, but if somebody knew what the material was they could easily make these.

SkunT 10-18-2004 06:11 PM

Re:hondata intake manifold gasket?
 

Originally Posted by Shockazooloo
The hondata gasket is made of some type of special plastic that doesn't transfer heat from the head to the manifold. I'm not sure on what type of plastic it is, but if somebody knew what the material was they could easily make these.

i know www.mcmaster.com (sp) has it and i guess someone on here is already doing that. according to sealthmodes response. if they could sell them cheap enough, they could be preety wealthy pretty quick.


All times are GMT -5. The time now is 08:38 AM.


© 2024 MH Sub I, LLC dba Internet Brands