HomeMadeTurbo installed... ::PICS::
Setup as of now...
Brand new remanufactured T3 60 trim .48/.60 Custom Beau Garrison manifold and 2.5 inch downpipe Custom coach 2.5 inch IC piping Tyrus 5 inch tall intercooler Custom 3 inch SS exhaust Auto Meter boost gauge Stealthmode oil line kit Turbo XS RFL bov (not installed yet, compressor surge! ) Temporary fuel management: Removed coolant temp sensor Retarded 4-5 degrees Running 3-4 psi The real fuel management (uberdata) and DSM 450cc injectors will be going in next weekend along with the bov and MBC... I am going for around 10 psi on the dyno. I also still need to paint the IC piping and downpipe. The oil return is kinda low and at a slight angle upwards, but I am going to try and fix that. I couldn't really tell if it smoked much because it was dark, but I made it home from Everett (about 150 miles) and it worked fine. Sometimes I would get a CEL sometimes I wouldn't (no missing link). I will have all the little things worked out next weekend. I am going to give her a little tune up this week as well. I will update once everything is completely finished and tuned. All the welding was done by Beau and Jeff also helped on the install. Thanks again Beau and Jeff. :) :::UPDATED::: At 12psi this car made 230whp/208wtq http://users.adelphia.net/~pshickey/images/Dyno3.JPG Best time at the track was 12.6 @ 107mph http://users.adelphia.net/~pshickey/.../TimeSlip3.JPG :::UPDATED::: My sexy manifold and turbo installed :-* https://www.homemadeturbo.com/turbo_...patz6/pat0.JPG The custom downpipe needs some paint :-X https://www.homemadeturbo.com/turbo_...patz6/pat1.JPG Oil lines... I think I used maybe 2 pieces from the stealthmode oil kit ;) https://www.homemadeturbo.com/turbo_...patz6/pat2.JPG https://www.homemadeturbo.com/turbo_...patz6/pat3.JPG Beau sizing up one of my charge pipes :o https://www.homemadeturbo.com/turbo_...patz6/pat4.JPG Me having a little fun with my IC piping ;D https://www.homemadeturbo.com/turbo_...patz6/pat5.JPG Beau working on the driver's side charge piping https://www.homemadeturbo.com/turbo_...patz6/pat6.JPG passenger side IC piping... Jeff Frank style :P https://www.homemadeturbo.com/turbo_...patz6/pat8.JPG https://www.homemadeturbo.com/turbo_...patz6/pat7.JPG Boost gauge install Jeff Frank style... he didn't want to get dirty https://www.homemadeturbo.com/turbo_...patz6/pat9.JPG https://www.homemadeturbo.com/turbo_...atz6/pat10.JPG Me looking like I am actually doing something https://www.homemadeturbo.com/turbo_...atz6/pat11.JPG And finally... https://www.homemadeturbo.com/turbo_...atz6/pat12.JPG Here are a few updated pictures... Me at PIR, ran a consistent 13.2 @ 101mph that night at only 9psi (shitty track) http://users.adelphia.net/~pshickey/images/cartrack.jpg Nice engine bay shot... http://users.adelphia.net/~pshickey/...EngineBay3.JPG It's defintely a sleeper... ;) http://users.adelphia.net/~pshickey/images/car1.jpg |
Re:HomeMadeTurbo installed... ::PICS::
|
Re:HomeMadeTurbo installed... ::PICS::
good luck, uberdata is good ----!
|
Re:HomeMadeTurbo installed... ::PICS::
Nice! Using anything to hold up your i/c? Mine is just hanging by the charge pipes...fucker better hold! Also, when is Beau going to go the FAQ on making manifolds! >:(
|
Re:HomeMadeTurbo installed... ::PICS::
I was thinking about drilling holes and bolting my manifold up, but I just ended up using some wire. It was held in there pretty good with the charge piping so I am sure it will be fine. I had to hack my bumper a lot to get it fitting right... me and the skil saw are pretty good friends now. ;D
https://www.homemadeturbo.com/pat/pat1.jpg |
Re:HomeMadeTurbo installed... ::PICS::
I see 4/4 pieces of the feed line. :P
|
Re:HomeMadeTurbo installed... ::PICS::
you wearing those over-alls makes me think you should be in Deliverance.......cue the banjo music
|
Re:HomeMadeTurbo installed... ::PICS::
PAT!! I knew you took it in the butt!!! lol, j/p
Looks good, I gues i will be seeing you on the 16th ;-) |
Re:HomeMadeTurbo installed... ::PICS::
now I know what my car will look like boosted.
|
Re:HomeMadeTurbo installed... ::PICS::
Nice work. I am officially jealous.
|
All times are GMT -5. The time now is 03:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands