Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
Hello HMT Board Members. I posted here a little while back to show you my 300zx. Since then I have added some stuff. I changed to a GT3582R turbo, and got rid of the distributor, and went with some GM Coil Packs, as my Stand Alone allowed me to use them. The car is SUPER smooth, and runs flipping insane. All the parts from the complete fuel system, rails, brackets, upper intake, Turbo relocation/wastegate adaptor, water lines, Engine/tranny mounts, ect..ect.. are all Homemade by me with the exception of the intake of which I had some help with the Tig Welding. The car took 6 years to build, and 1 year to tune, not just for power, but actual driveability.
I run the car @ 18 PSI, not near the max, but it is a nice street Boost. The car makes 366 whp and 416 lt torque @ 18 psi. It is fully capable of 500 WHP, but I prefer not to push it too hard! ;) Some pics: http://www.88hybrid.com/web%20forum%...007/pose-3.gif http://www.88hybrid.com/web%20forum%...2007/pose5.gif http://www.88hybrid.com/web%20forum%...2007/pose6.gif http://www.88hybrid.com/web%20forum%...2007/pose2.gif http://www.88hybrid.com/web%20forum%...2007/pose4.gif Engine Shots: http://www.88hybrid.com/web%20forum%...oject/pic1.gif http://www.88hybrid.com/web%20forum%...oject/pic2.gif http://www.88hybrid.com/web%20forum%...oject/pic4.gif http://www.88hybrid.com/web%20forum%...oject/pic5.gif http://www.88hybrid.com/web%20forum%...oject/pic6.gif http://www.88hybrid.com/web%20forum%...oject/pic7.gif http://www.88hybrid.com/web%20forum%...oject/pic8.gif http://www.88hybrid.com/web%20forum%...oject/pic9.gif http://www.88hybrid.com/web%20forum%...ject/pic10.gif http://www.88hybrid.com/web%20forum%...ject/pic11.gif Internal Stuff During the build. http://www.88hybrid.com/web%20forum%...d-work-002.gif Performance Valve seat/ valve Cuts make as much gains as Porting the heads themselves. Notice the Dark Exhaust ports, that is Ceramic coating. http://www.88hybrid.com/web%20forum%...d-work-003.gif This picture shows the application of Ceramics to the face of the exhaust port. This will help keep heat from transfering to the manifolds. http://www.88hybrid.com/web%20forum%...d-work-005.gif J/E 8.0 Pistons Eagle H-Beam Forged Rods Dry Film Lubricant on ALL Bearings http://www.88hybrid.com/My%2087%20Tu...ed-Goodies.gif Dyno Pulls were made on a Dyna Pac, and not a Dyno Jet. Dyno Jet numbers are used more often to show higher numbers over the Dyna Pac, but I needed a good Tuning dyno, and a Brag Number is not what im worried about. The only thing I am going to do is change the cams. I would like to see an increase is power in the 4500-7000 range, and increase the REVS.!! I have built the car with a 400 WHP goal @ 18 PSI. I will get there very soon. Also... These Dyno also show my old T4 turbo. Look how much power I gained by adding the Ball Bearing GT turbo. It made a HUGE difference in Spool time, and made the engine Way more useable over the Rev range. 366 whp http://www.88hybrid.com/web%20forum%...hp-10-7-07.gif 416 wtq http://www.88hybrid.com/web%20forum%...tq-10-7-07.gif Engine Bay Progression 2002 http://img.villagephotos.com/p/2004-...F-100_0269.JPG 2004 http://img.villagephotos.com/p/2004-...A-P1040031.JPG 2006 http://www.88hybrid.com/web%20forum%...ine-bay-06.gif 2007 http://www.88hybrid.com/web%20forum%...oject/pic1.gif[/img] More on Car @ 88hybrid.com |
Re: Homemade turbo Z31 300Zx Update lots of pics
Holy ---- so that's what a dyno graph of an engine with displacement looks like... very nice.
|
Re: Homemade turbo Z31 300Zx Update lots of pics
Awesome man. That car still reminds me of the wrath(or??wraith??) U don't see alot of those cars that are still that clean and make that kinda power, not to mention TORQUE :y
|
Re: Homemade turbo Z31 300Zx Update lots of pics
very nice. The 90-96 tt 300zx is my dream car, but yours is very well done. Sexual.
|
Re: Homemade turbo Z31 300Zx Update lots of pics
that back shot if ------ hot, more pics please,engine bay looks clean, i always liked the late 80's 300zx.
|
Re: Homemade turbo Z31 300Zx Update lots of pics
WOW. Now that's the kind of engine bay I like to see.
I would like to know what turbine a/r you are using on the gt35R and mostly, the specifications of that T4 turbo that seemed to push very decently but sadly, much later than the GT bb.. Thanks and congrats. |
Re: Homemade turbo Z31 300Zx Update lots of pics
:o Holy ---- nice work that is ------- hot.I have always kinda liked those older Z cars.Get some reground cams and go for more :y That engine bay is clean as ---- dude great work.
|
Re: Homemade turbo Z31 300Zx Update lots of pics
Originally Posted by BLAAST
WOW. Now that's the kind of engine bay I like to see.
I would like to know what turbine a/r you are using on the gt35R and mostly, the specifications of that T4 turbo that seemed to push very decently but sadly, much later than the GT bb.. Thanks and congrats. T4 = T-4 turbo .84 turbine 0-trim/ t04b H-3 trim compressor gt = GT3582r |
Re: Homemade turbo Z31 300Zx Update lots of pics
Originally Posted by BLAAST
WOW. Now that's the kind of engine bay I like to see.
I would like to know what turbine a/r you are using on the gt35R... and mostly, the specifications of that T4 turbo that seemed to push very decently but sadly, much later than the GT bb.. Thanks and congrats. .. I am useing the .63 Hotside. I will still make my Power goal with the smaller Hotside, But you see the Tourque curve, I like the fact I make so much power low. Im sure that when the Cam grind changes ,and I actually make more power by revving it higher, I may bolt the .84 Hotside (I bought it at the same tiime I bought the turbo ;)) I guess we'll see.. 8) I didnt get it finished in time to run it at the strip. I weighs about 2900LBS. Im wondering what it will run the 1/4 mile in. :6 |
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
that....is ------- nice dude. 8)
|
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
------- nice!
what EMS are you using? |
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
Originally Posted by ryan89crx
------- nice!
what EMS are you using? sdsefi.com |
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
Why is everything so shiny? It hurts to look, needs flat black!
jk, awesome car, I love all the custom work :y |
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
I was thinking about it and that is the nicest Z31 300 i have ever seen O0 Post some ripper vids asap though and im thinking it needs some nig nog setting on the boost controller :y
|
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
nice Z :1
|
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
Flipping sweet built. I love that year 300zx hate the year after it plus the engine bay is WAY to cramp compared to that year. Everything is nice and super clean. Maybe a harness tuck would be the only thing i'd change. But have to say one of if not the nicest 300zx of that year bodt style that i've ever seen
|
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
clean ----. not a cluster ---- like the newer 300zs.
|
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
front page???
|
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
sick car, thats not the stocvk motor is it?
|
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
Damn I never really like those cars. But I have to say I love yours :o. It is so clean, it looks like you put a lot of hard work into it. Have to say you are on th top 10 best noobs ever.
|
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
Originally Posted by mycarslow
front page???
I second that motion |
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
holy ----... :o :o
very nice!! |
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
Third the motion for front page. That first picture screams "bad ass ----------er" hahaha. She looks sweet man you've done a great job with her.
|
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
88hybrid.com damn you have a ton of pic's, any vids?
|
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
Very cool Welcome! ;D
Im glad you like my Z31. They dont get a whole lot of love on the tuner scene, and its ashame. The VG30et is a very potant engine, a few upgrades to one, and you have a monster on your hands. I wanted to show people what could be done with a first gen 300zx. They can be found for cheap, although they have seen an increase in value over the past few years, and the Z31 community is growing, and support for them in the aftermarket is growing also. Alot of 240SX items are being used on them. For example you can modify the Coil over setups sold for the 240sx to work on the Z31 with great success. Im considered one of the top ten Noobs!! :y Thanks!! What does front page mean? (time for a stupid newb question) |
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
DA DA DA DDDDDAAAAAAMMMMM
Thats just sexy! |
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
Originally Posted by chuck mcnegrilizzle
sick car, thats not the stocvk motor is it?
|
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
Originally Posted by crxvtec91
88hybrid.com damn you have a ton of pic's, any vids?
|
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
Originally Posted by 88hybrid
If you go to 88hybrid.com/forum, or just click forum on the Home page, then go to the Black Bitch section. I have a few of the car with the T4, but none with the GT yet.
It's such a weird contrast |
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
Originally Posted by wafflesincars
Goddamn your forums are so campy :S
It's such a weird contrast |
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
Originally Posted by 88hybrid
They dont get a whole lot of love on the tuner scene, and its ashame. The VG30et is a very potant engine, a few upgrades to one, and you have a monster on your hands. |
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
That's a beautiful Z31. Hopefully one day I'll get my S30 moving under it's own power. lol.
|
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
thats pretty nice man. been a while since ive seen that body style in nice shape. props on the setup man.
|
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
Very nice Z.
|
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
Awesome car. Thing screams sex, I bet it sounds like a dream.
|
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
the pic with the fmu is the best one :1
|
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
Tits front page. A guy I work with just bought a super clean 84 nissan 50th anniversary edition.
|
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
Originally Posted by brine04
Tits front page. A guy I work with just bought a super clean 84 nissan 50th anniversary edition.
|
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
nice setup.
|
Re: Homemade turbo Z31 300Zx Update lots of pics, added more pics by request
Oh wow. just wow. Deffinitly Front page ---- right there. Can we get some vids? I need to see dirty 2nds please.
|
All times are GMT -5. The time now is 12:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands