Homemade Boost control at it's finest...
1.0 BAR
Joined: Dec 2005
Posts: 391
Re: Homemade Boost control at it's finest...
yeah for more simplicity sake you could run a WG with the boost setting you want in 1st and then in every other gear you could have a system like this to bleed style, upp the boost.... so have a momentary button on the shifter that will allow connection while your thumb is on it during 1st gear or whatever and connect teh system via a 5 pin relay and use the 87a pin to arm the boost upping system..... there fore youwill always be in higher boost unless your finger is on the button which will dissarm the boost controler.. falling back onto the stock WG spring setting
Thread Starter
0.5 BAR
Joined: Jun 2003
Posts: 82
Re: Homemade Boost control at it's finest...
Originally Posted by Joseph Davis
Oh, yah, Speedy? Post pics of your car. 
Originally Posted by Racintweek
this should work right
1.5 BAR
Joined: Oct 2004
Posts: 1,167
Re: Homemade Boost control at it's finest...
Originally Posted by Joseph Davis
Lever arm micro-switches down on the shifter FTW! There's your gear based boost, bitches.
You're saying you tune your 's AFRs via boost controller?
That's nice.
You're saying you tune your 's AFRs via boost controller?
That's nice.
thats all.
3.0 BAR
Joined: Jan 2005
Posts: 2,877
Re: Homemade Boost control at it's finest...
Originally Posted by Speed Phreak
It should, but why not just run one MBC for "hi-boost" and let the w/g spring take care of the low boost ?
most people using junkyard turbo's need more than the 5-7psi the stock WG comes with, but if someone is using an external unit you could leave it out
i know there is a VW part that you can use for the electronic 1-way valve but i have to remember the part number. they are like $10 at the dealer and can hold ~35psi,much more than what 99% of people need
EF's are the ---- in camo. and is that an Si seat in front of the tires in the first pic??
