holset H1C on a 1.6L... input pls
0.0 BAR
Joined: Oct 2005
Posts: 0
Re: holset H1C on a 1.6L... input pls
Originally Posted by marcj
i'm already using a cast log manifold..
just by seeing it, does this seem like the 18cm^2 housing? it just seems so large to me..
oh well, I can easily make a plate to block off one side.. if it is a 18cm^2 or bigger, half would yield ~9 cm2 = 0.65 A/R, give or take a little.. am i right?
EDIT: ---- THE "KO" WORDFILTER
just by seeing it, does this seem like the 18cm^2 housing? it just seems so large to me..
oh well, I can easily make a plate to block off one side.. if it is a 18cm^2 or bigger, half would yield ~9 cm2 = 0.65 A/R, give or take a little.. am i right?
EDIT: ---- THE "KO" WORDFILTER
0.0 BAR
Joined: Jan 2008
Posts: 0
Re: holset H1C on a 1.6L... input pls
[quote=marcj ]
i'm already using a cast log manifold..
just by seeing it, does this seem like the 18cm^2 housing? it just seems so large to me..
oh well, I can easily make a plate to block off one side.. if it is a 18cm^2 or bigger, half would yield ~9 cm2 = 0.65 A/R, give or take a little.. am i rig
That looks like the 21 cm housing. Looks very similar to the 18 till you have a 1 on 1 comparision then its kinda obvious. Just look on the housing. It should be stamped telling what size it is.
i'm already using a cast log manifold..
just by seeing it, does this seem like the 18cm^2 housing? it just seems so large to me..
oh well, I can easily make a plate to block off one side.. if it is a 18cm^2 or bigger, half would yield ~9 cm2 = 0.65 A/R, give or take a little.. am i rig
That looks like the 21 cm housing. Looks very similar to the 18 till you have a 1 on 1 comparision then its kinda obvious. Just look on the housing. It should be stamped telling what size it is.
Thread Starter
1.5 BAR
Joined: Dec 2006
Posts: 1,049
Re: holset H1C on a 1.6L... input pls
6 cm2 = 0.41 A/R
7 cm2 = 0.49 A/R
8 cm2 = 0.57 A/R
9 cm2 = 0.65 A/R
10 cm2 = 0.73 A/R
11 cm2 = 0.81 A/R
12 cm2 = 0.89 A/R
14 cm2 = 0.97 A/R
15 cm2 = 1.05 A/R
16 cm2 = 1.13 A/R
17 cm2 = 1.29 A/R
19 cm2 = 1.37 A/R
20 cm2 = 1.45 A/R
21 cm2 = 1.53 A/R
22 cm2 = 1.61 A/R
^^ is this accurate?
7 cm2 = 0.49 A/R
8 cm2 = 0.57 A/R
9 cm2 = 0.65 A/R
10 cm2 = 0.73 A/R
11 cm2 = 0.81 A/R
12 cm2 = 0.89 A/R
14 cm2 = 0.97 A/R
15 cm2 = 1.05 A/R
16 cm2 = 1.13 A/R
17 cm2 = 1.29 A/R
19 cm2 = 1.37 A/R
20 cm2 = 1.45 A/R
21 cm2 = 1.53 A/R
22 cm2 = 1.61 A/R
^^ is this accurate?
1.0 BAR
Joined: Dec 2006
Posts: 311
Re: holset H1C on a 1.6L... input pls
Post a picture of the compressor housing too. There are a couple sizes of H1C compressors, with pretty decent size differences.
You should be able to swap a 12cm housing from a later model HX35 on the H1C for a smaller housing.
Its not accurate, but its probably somewhere in the ballpark, or at least the parking lot.
You should be able to swap a 12cm housing from a later model HX35 on the H1C for a smaller housing.
Its not accurate, but its probably somewhere in the ballpark, or at least the parking lot.
Thread Starter
1.5 BAR
Joined: Dec 2006
Posts: 1,049
Re: holset H1C on a 1.6L... input pls
Originally Posted by aero
Post a picture of the compressor housing too. There are a couple sizes of H1C compressors, with pretty decent size differences.
You should be able to swap a 12cm housing from a later model HX35 on the H1C for a smaller housing.
Its not accurate, but its probably somewhere in the ballpark, or at least the parking lot.
You should be able to swap a 12cm housing from a later model HX35 on the H1C for a smaller housing.
Its not accurate, but its probably somewhere in the ballpark, or at least the parking lot.
how can I identify the older model HX35 housing?
0.0 BAR
Joined: Aug 2007
Posts: 0
From: Okotoks, AB
Re: holset H1C on a 1.6L... input pls
You have the LAG master 21.5cm housing found on the auto trucks, and some equipment.
To answer your original question, yes it is possible to have a t3 style housing machined to work, but you could buy a brand new turbo for less then the process.
Just block the one port as everyone else has already said, and rock that bitch.
To answer your original question, yes it is possible to have a t3 style housing machined to work, but you could buy a brand new turbo for less then the process.
Just block the one port as everyone else has already said, and rock that bitch.
1.0 BAR
Joined: Dec 2006
Posts: 311
Re: holset H1C on a 1.6L... input pls
Here is one.
http://cgi.ebay.com/ebaymotors/Dodge...Q5fAccessories
It will probably go for more than you want to spend though.
http://cgi.ebay.com/ebaymotors/Dodge...Q5fAccessories
It will probably go for more than you want to spend though.
1.5 BAR
Joined: Sep 2008
Posts: 694
Re: holset H1C on a 1.6L... input pls
So look at the exhaust outlet in the ebay add. See that wastegate area. All that metal that outlined the v band flange bolt up area is what I was pming you about that I had machined off. And the cover that originally bolted to it is what I welded directly to it. In essence it made it thinner to fit into my engine bay. Blundell,dmc1, mista Bone, drail, and I think foowee have all seen how I got it . It works man. 
