HMT a miata?
07-26-2006, 11:34 AM
#31
0.0 BAR
Join Date: Jan 2006
Location: Mother Fucking Washingtion
Posts: 0
Re: HMT a miata?
I live about 15 miles north of Bremerton Wa. The ------- hillbilly hick ---- that owns the wrecking yard Could care less about his ---- that he has. You can work a deal like a ****. Show up with a 12 pack of bush light and $20 and he will give you just about anything you want. God I love white trash people!!! Not a care in the world. Anyways boost it, ---- it if it blows up. HMT FOR LIFE!!!!!!
07-27-2006, 10:04 AM
#32
1.0 BAR
Join Date: Nov 2005
Posts: 478
Re: HMT a miata?
The miata motor is the same as the 323 86-89. They come with oil squirters, the only difference is they used a lighter rod. I just crashed my buddies 92 car into a curb about 4 weeks ago. They are like driving a bigger gokart. Good gear ratios in the tranny.
Good luck
Good luck
07-31-2006, 02:34 AM
#33
1.0 BAR
Join Date: Oct 2003
Posts: 602
Re: HMT a miata?
Don't turbo a 90 get a 92-93 for a 1.6 or better yet a 94 up conversion.
Reason: 90's have a short nose crank which is prone to snap, A crappy 6"in non lsd diff, and turque less engine.
Best bet:
1.1.6L(92-93) 1.8L(94-2000)
2. GT-R forged rods $550 (corkspeed)
3. Wiseco pistons (summit racing)
4. DIY turbo mani and DP (Dont buy ebay ---- it will crack)
5. Emanage blue w/ autotune and O2 clamp
6. Custom exhaust
Check out miata.net for more info in the garage section.
Reason: 90's have a short nose crank which is prone to snap, A crappy 6"in non lsd diff, and turque less engine.
Best bet:
1.1.6L(92-93) 1.8L(94-2000)
2. GT-R forged rods $550 (corkspeed)
3. Wiseco pistons (summit racing)
4. DIY turbo mani and DP (Dont buy ebay ---- it will crack)
5. Emanage blue w/ autotune and O2 clamp
6. Custom exhaust
Check out miata.net for more info in the garage section.
07-31-2006, 02:39 AM
#34
1.0 BAR
Join Date: May 2006
Posts: 264
07-31-2006, 05:08 AM
#36
3.0 BAR
Join Date: Jan 2006
Posts: 2,875
Re: HMT a miata?
Originally Posted by ratcityrex
Ive heard that there is a small block ford convesion that only cost about 225 for all the mounts. Then all you need is the motor and trans, and a rearend out of a Bronco II, or a ford ranger they hold quite a bit of power before they break. Then you do a twin turbo setup, and rip ***!!!! btw it adds about 125 lbs to the frond end so ive been told. I think that would be alot of fun.
07-31-2006, 02:33 PM
#37
1.0 BAR
Join Date: Oct 2005
Posts: 236
Re: HMT a miata?
Originally Posted by hyper4mance2k
Try hooked on phonics, it may help your reading problem.
08-12-2006, 07:16 PM
#40
0.5 BAR
Join Date: Jan 2005
Posts: 158
Re: HMT a miata?
yea man miataturbo.net has you set. currently i own two 1st gen miatas and i wont get another car again. the 1.6 has forged rods and pistons from the factory and can handle a fuel managment unit making 200 whp for over 8 years with a programable ecu i am sure you could make 250 and never have ---- go on you. currently i have a manifold and downpipe for the 1.6 miata for sale i made. its fully stainless to the head flange and all and fully stainless 3" downpipe if your interested. its on the miata.net classifieds under the forced induction section. manifold/downpipe. deffinetly turbo it. the miata is perfect in everyway imo except for power, thats really all they need, oh and a lsd. let me know my name on miataturbo.net is mxv and oh miata.net it is o0Quicksilver0o. ---- anyone who has somthing against miata's, have fun finding a better platform to do anything with and esspecially for the money.
Thread
Thread Starter
Forum
Replies
Last Post
