HMT:DIY free horsepower
 

Just like the title says. I know everyone has their own little ghetto ways of making their cars run a bit better. So post em up. Like disconnecting the throttle body heater or shimming the hood to get added ventalation, or even some racing trick like brake boosting. Lets all share in the ghetto free HP wealth. O0

Re: HMT:DIY free horsepower
 

I took out just about all the coolant lines to the intake manifold and picked up a few ponies when i was n/a. I used to take off my power steering belt when i was at the track to pick up 2 tenths, and i ditched my a/c. Taking 50lbs off the front end of the car was noticeable for me

Re: HMT:DIY free horsepower
 

took out all my AC ----, front and rear bumper supports and fiberglass fenders and front/rear bumper.

Re: HMT:DIY free horsepower
 

i keep my weight down so i can go faster and don't let anyone else ride w/ me.

Re: HMT:DIY free horsepower
 

Colder thermostat, removed rear seats, removed carpets.

Re: HMT:DIY free horsepower
 

i made my own CAI out of my stock ait box. kinda hard to explain, but bacially, i made a tube that goes from under the air box down into the fender well. it worked, and i noticed a difference. and i kept a filter.

Re: HMT:DIY free horsepower
 

no bumper support ,a/c ,ps ,cruse controll put a manual rack in , wiper motor (rainx the window) sound matting under the carpet , thats aboutit and also turned the boost up

Re: HMT:DIY free horsepower
 

the altimate free HP is to CRANK UP THEB BOOST >:D

Re: HMT:DIY free horsepower
 

Air chissle out all the sound deadening material and theres more matting behind the dash. Not exaclty HP but it helps.

Remove the slack from your throttle cable. You wouldn't believe how many cars I see that have tons of slack and when I point it out people just shrug their shoulders and go " uh huh..."

And the most obvious, A TUNE UP! ::) not just plugs and bling bling plug wires, but fuel filter, carbon cleaner, eveything.

Re: HMT:DIY free horsepower
 

I just blocked off EGR and bypassed IACV and TB coolant lines..

disable IM butterfly valves by disconnecting the solenoid from the vacuum source....