Re: Hey nig-nogs, I just boosted another Escort **Pic's!**
Originally Posted by jacob_kohler
Not bad but its still a ford.
|
Re: Hey nig-nogs, I just boosted another Escort **Pic's!**
Originally Posted by jacob_kohler
Not bad but its still a ford.
|
Re: Hey nig-nogs, I just boosted another Escort **Pic's!**
how much power do you get out of your escorts?
|
Re: Hey nig-nogs, I just boosted another Escort **Pic's!**
Originally Posted by salesmonkey
how much power do you get out of your escorts?
1.9 block with 2.0 8 valve head (low compresstion) @ 17psi 212whp/262wtq (1-7/8" Exhaust & 10:1 AFR). (^Both with IHI Turbo and off the chart rich) This current non-intercooled set up @ 5psi is probly making ~145whp/165wtq. This car with A/C and P/S is 2300lbs, my other Escort is a base model with manual steering and no A/C is about 2150lbs. |
Re: Hey nig-nogs, I just boosted another Escort **Pic's!**
Looks really nice and clean. Too bad I can keep my engine bay looking that clean.
|
Re: Hey nig-nogs, I just boosted another Escort **Pic's!**
does look pretty clean .. But i have yet to see a turbo escort in the anoka area .. where ya hiding? lol
|
Re: Hey nig-nogs, I just boosted another Escort **Pic's!**
http://memimage.cardomain.net/member...83_53_full.jpg
Originally Posted by jeffescortlx
Here's the oil feed, if you look close to the left side, you can see the solid feed line, I used a vise grip to pinch the line for a oil restrictor, I just squished the line until I got the pressure I wanted.
your a ------- genius ;D |
Re: Hey nig-nogs, I just boosted another Escort **Pic's!**
Originally Posted by jeffescortlx
Here's the oil feed, if you look close to the left side, you can see the solid feed line, I used a vise grip to pinch the line for a oil restrictor, I just squished the line until I got the pressure I wanted.
Originally Posted by southwest2118
your a ------- genius ;D
Naw, he just ghetto. |
Re: Hey nig-nogs, I just boosted another Escort **Pic's!**
Originally Posted by jeffescortlx
The stock internal waste gate on the T25 is about 8psi, that's just a little too high for the way I have it set up right now. So in order to run lower boost then the waste gate setting, I disconnected the waste gate from the flapper, and used just a spring (shown here) to hold the door shut with just enough pressure to run 5psi. I learned this trick from HMT, I was surprised to see it had no boost creep and still spools fast.
Where is that at and how do I hook my garret up like that? |
Re: Hey nig-nogs, I just boosted another Escort **Pic's!**
I call it more of a cheap basterd getto style.
Any internal waste gate can be modified like that, Just disconnect the waste gate actuator rod from the flapper door and use a spring to hold the flapper shut. The harder the spring pressure, the higher the boost your gonna run.
Originally Posted by SiTurboD
does look pretty clean .. But i have yet to see a turbo escort in the anoka area .. where ya hiding? lol
|
All times are GMT -5. The time now is 04:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands