hey abazz whats ur recipe for those #'s in ur motor??
can u give in detail the stuff u running in ur motor as far as internals and electronics go???
|
Re:hey abazz whats ur recipe for those #'s in ur motor??
Look under his LS/vtec section of building it up under tech section. He's making 175whp all motor, so with a turbo, it peps it up to 260 some. Remember he's using this for his street car, so that turbo is undersized for that motor. That's very impressive.
and make sure you study around a bit.... tech section, turbo projects. Lots of goodies under there. |
Re:hey abazz whats ur recipe for those #'s in ur motor??
Setup:
Stock B18b w/ P72 GSR Head GSR Cams YS1 LS Tranny (no lsd) JG Vic X intake 64mm T-body DSM 450's 2.5IC Piping Tyrus 6in IC Tial 50mm BOV Zdyne Gold SECU T3/T4 .48ex/57comp DeltaGate MDF Manifold 2.5dp to 3in Straight Exhaust (apexi N1) Nology Wires GSR Axles GSR Stock Clutch w/ ACT Xtreme PP |
Re:hey abazz whats ur recipe for those #'s in ur motor??
damn, why so small? scared of spool up time? hehe. any plans for new turbo? a nice t3/t04e bring that ---- up to 10 secs spec.
|
Re:hey abazz whats ur recipe for those #'s in ur motor??
I have a t3/04e on it right now, just a really small spec one..
thinking about a 60-1 T3 for the next turbo on the red car.. A little lag, but worth it. 10sec specs? not on a stock engine ::) I have a race car for that stuff.... |
Re:hey abazz whats ur recipe for those #'s in ur motor??
hey Jeff how cheap you thikn i could get a B18 the gsr head and a Ls tranny? If i get a CRX shell this summer and work on it i am trying to see how much i need to spend to get it running w/o the turbo stuff. I really wanted to go b18 if i went CRX and i really like your LS/Vtec setup. I plan on rebuilding the b18.I have a few good mechanic freinds. I will put a full turbo setup on it maybe by the end of the summer or early fall if i can ge the money by then.
|
Re:hey abazz whats ur recipe for those #'s in ur motor??
if you got the money buy a b18c and boost it
although turbo b18a's are cheap and fast. |
Re:hey abazz whats ur recipe for those #'s in ur motor??
Just wanted to get a price estimate on a Ls tranny, GSr head and any B18 block cause i can rebuid it.
This would be like the key value i would look for after i get a CRX shell. The "lets Do this number" so i dont get stuck with a non running CRX. I putting together a turbo goal maoney number now so once i get a CRX running the B18 i will know when i can afford to turbo it. |
Re:hey abazz whats ur recipe for those #'s in ur motor??
i think i can hit 10's with a stock internal sohc.... ;D
|
All times are GMT -5. The time now is 10:59 AM. |
© 2024 MH Sub I, LLC dba Internet Brands