hey abazz whats ur recipe for those #'s in ur motor??
#2
Re:hey abazz whats ur recipe for those #'s in ur motor??
Look under his LS/vtec section of building it up under tech section. He's making 175whp all motor, so with a turbo, it peps it up to 260 some. Remember he's using this for his street car, so that turbo is undersized for that motor. That's very impressive.
and make sure you study around a bit.... tech section, turbo projects. Lots of goodies under there.
and make sure you study around a bit.... tech section, turbo projects. Lots of goodies under there.
#3
Re:hey abazz whats ur recipe for those #'s in ur motor??
Setup:
Stock B18b w/ P72 GSR Head
GSR Cams
YS1 LS Tranny (no lsd)
JG Vic X intake
64mm T-body
DSM 450's
2.5IC Piping
Tyrus 6in IC
Tial 50mm BOV
Zdyne Gold SECU
T3/T4 .48ex/57comp
DeltaGate
MDF Manifold
2.5dp to 3in Straight Exhaust (apexi N1)
Nology Wires
GSR Axles
GSR Stock Clutch w/ ACT Xtreme PP
Stock B18b w/ P72 GSR Head
GSR Cams
YS1 LS Tranny (no lsd)
JG Vic X intake
64mm T-body
DSM 450's
2.5IC Piping
Tyrus 6in IC
Tial 50mm BOV
Zdyne Gold SECU
T3/T4 .48ex/57comp
DeltaGate
MDF Manifold
2.5dp to 3in Straight Exhaust (apexi N1)
Nology Wires
GSR Axles
GSR Stock Clutch w/ ACT Xtreme PP
#5
Re:hey abazz whats ur recipe for those #'s in ur motor??
I have a t3/04e on it right now, just a really small spec one..
thinking about a 60-1 T3 for the next turbo on the red car.. A little lag, but worth it.
10sec specs? not on a stock engine
I have a race car for that stuff....
thinking about a 60-1 T3 for the next turbo on the red car.. A little lag, but worth it.
10sec specs? not on a stock engine
I have a race car for that stuff....
#6
Re:hey abazz whats ur recipe for those #'s in ur motor??
hey Jeff how cheap you thikn i could get a B18 the gsr head and a Ls tranny? If i get a CRX shell this summer and work on it i am trying to see how much i need to spend to get it running w/o the turbo stuff. I really wanted to go b18 if i went CRX and i really like your LS/Vtec setup. I plan on rebuilding the b18.I have a few good mechanic freinds. I will put a full turbo setup on it maybe by the end of the summer or early fall if i can ge the money by then.
#8
Re:hey abazz whats ur recipe for those #'s in ur motor??
Just wanted to get a price estimate on a Ls tranny, GSr head and any B18 block cause i can rebuid it.
This would be like the key value i would look for after i get a CRX shell. The "lets Do this number" so i dont get stuck with a non running CRX. I putting together a turbo goal maoney number now so once i get a CRX running the B18 i will know when i can afford to turbo it.
This would be like the key value i would look for after i get a CRX shell. The "lets Do this number" so i dont get stuck with a non running CRX. I putting together a turbo goal maoney number now so once i get a CRX running the B18 i will know when i can afford to turbo it.
Thread
Thread Starter
Forum
Replies
Last Post
5thgencivickid
General Discussion
20
05-13-2006 04:53 PM