|
Here is my B16A2 setup in construction!
Here is some pictures of my current project.
http://tinypic.com/nwu8 Here you can see my Garrett GT30r http://tinypic.com/nwoo Here you see my Edelbrock VictorX Intake Manifold http://tinypic.com/nwog http://tinypic.com/nwp2 http://tinypic.com/nwp4 http://tinypic.com/nwph http://tinypic.com/nwpt http://tinypic.com/nwpy http://tinypic.com/nwqc http://tinypic.com/nwr6 http://tinypic.com/nwr7 Here's a list of the mods made on the car! B16a2 2000 Eagle Rod SRP 8.5:1 Pistons Block Guard High flow oil pump 8 lbs ACT Lightweight Flywheel (Original 18 lbs) 2 lbs Aluminium Crank pulley (Original = 5 lbs) High performance Main & Rod bearing Type-R Cam Garrett GT-30r Turbo ssautochrome ---- ("I bought it before I knew it was crap! So I'll use it till it brakes!)Edelbrock VictorX Intake Manifold 4 X 880CC Injector Uberdata P28 ECU Modified fuel rail 255lph fuel pump All fuel lines brainded Stainless Cometic Head Gasket Oversized Throttle Body Ferrea Strainless Steel Valve And Im probably forgeting some... |
Re:Here is my B16A2 setup in construction!
------- nice ------- setup maaaaan! but you shouldn't have posted the body, because everyone is gonna flame you and call you a ricer, for those chrome altezzas, and body kit ;D ;D
|
Re:Here is my B16A2 setup in construction!
Rice is the new sleeper! :D
|
Re:Here is my B16A2 setup in construction!
get rid of all that fiberglass and it will be pimp.
|
Re:Here is my B16A2 setup in construction!
Originally Posted by Dibble
Rice is the new sleeper! :D
Atleast switch the altezzas to stock. I hate those, and they leak like a bitch. Nice project you got going there, I love the gold ;) |
Re:Here is my B16A2 setup in construction!
You got ALLL that money in that engine and you went with a block guard instead of sleeves or posting the block...I bet you wind up regretting that...
|
Re:Here is my B16A2 setup in construction!
I know for the body kit but my girlfriend have break my front bumbper so i have decided since i have to change it anyway to put this little kit on it it's about the same price a only the front stock bumper so!! And for the block guard i don't understand why post or put sleeve in it?
Sleeve is just about 2000$ and it is not necessairy! a block guard with oversize hole should do the job just right! |
Re:Here is my B16A2 setup in construction!
$2000!!! :o I've priced around at a few machine shops and the WORST price I got was 1500 WITH pistons & rods! Check around more...if your going to open the motor up you should do it right or not at all
|
Re:Here is my B16A2 setup in construction!
Originally Posted by Zeusfire69
if your going to open the motor up you should do it right or not at all
|
Re:Here is my B16A2 setup in construction!
damn, last i checked, afront bumper cost no more than $100 dollors. must be a cheap ass body kit.
|
| All times are GMT -5. The time now is 01:47 PM. |
© 2024 MH Sub I, LLC dba Internet Brands