Here is my B16A2 setup in construction!
#1
Here is my B16A2 setup in construction!
Here is some pictures of my current project.
Here you can see my Garrett GT30r
Here you see my Edelbrock VictorX Intake Manifold
Here's a list of the mods made on the car!
B16a2 2000
Eagle Rod
SRP 8.5:1 Pistons
Block Guard
High flow oil pump
8 lbs ACT Lightweight Flywheel (Original 18 lbs)
2 lbs Aluminium Crank pulley (Original = 5 lbs)
High performance Main & Rod bearing
Type-R Cam
Garrett GT-30r Turbo
ssautochrome ---- ("I bought it before I knew it was crap! So I'll use it till it brakes!)Edelbrock VictorX Intake Manifold
4 X 880CC Injector
Uberdata P28 ECU
Modified fuel rail
255lph fuel pump
All fuel lines brainded Stainless
Cometic Head Gasket
Oversized Throttle Body
Ferrea Strainless Steel Valve
And Im probably forgeting some...
Here you can see my Garrett GT30r
Here you see my Edelbrock VictorX Intake Manifold
Here's a list of the mods made on the car!
B16a2 2000
Eagle Rod
SRP 8.5:1 Pistons
Block Guard
High flow oil pump
8 lbs ACT Lightweight Flywheel (Original 18 lbs)
2 lbs Aluminium Crank pulley (Original = 5 lbs)
High performance Main & Rod bearing
Type-R Cam
Garrett GT-30r Turbo
ssautochrome ---- ("I bought it before I knew it was crap! So I'll use it till it brakes!)Edelbrock VictorX Intake Manifold
4 X 880CC Injector
Uberdata P28 ECU
Modified fuel rail
255lph fuel pump
All fuel lines brainded Stainless
Cometic Head Gasket
Oversized Throttle Body
Ferrea Strainless Steel Valve
And Im probably forgeting some...
#5
Re:Here is my B16A2 setup in construction!
Originally Posted by Dibble
Rice is the new sleeper!
Atleast switch the altezzas to stock. I hate those, and they leak like a bitch. Nice project you got going there, I love the gold
#7
Re:Here is my B16A2 setup in construction!
I know for the body kit but my girlfriend have break my front bumbper so i have decided since i have to change it anyway to put this little kit on it it's about the same price a only the front stock bumper so!! And for the block guard i don't understand why post or put sleeve in it?
Sleeve is just about 2000$ and it is not necessairy! a block guard with oversize hole should do the job just right!
Sleeve is just about 2000$ and it is not necessairy! a block guard with oversize hole should do the job just right!
#8
Re:Here is my B16A2 setup in construction!
$2000!!! I've priced around at a few machine shops and the WORST price I got was 1500 WITH pistons & rods! Check around more...if your going to open the motor up you should do it right or not at all
#9
Re:Here is my B16A2 setup in construction!
Originally Posted by Zeusfire69
if your going to open the motor up you should do it right or not at all