help please help car runs but
#1
help please help car runs but
ok to begin with my setup is d16y8 with hf mani t3 turbo 42ar and 48ar. 2 1/2 inch exhaust all the way back. got it runnin last nite but i think its runnin real rich. it want boost past 5k rpm but i can gently give it gas and it will go past 5k but if i give it any more it will misfire also i can rev to about 5k then flip the key on then off and it will boost all the way to the redline but to do it again i have to flip the key. its not hte map sensor we already put a new one on. we are pretty sure its becuse is so rich. is there any other way to lean it out other than reburnin the chip becasue my freinds burner wont read a 512 or watever it is chip. do u think it could be the o2 sensor as it is in the hf's o2 bung have heard taht it isnt the best place for it?... any help appreciated
#5
Re: help please help car runs but
stock everything rite now. will be installing dsm's and a new walbro fuel pump in the near future but not till i get all the bugs worked out on this. also i converted to obd1 via chipped ecu do i need to rewire my tps. i know my friend had to when he converted to obd1 from obd0. so a im usure.
#8
Re: help please help car runs but
Originally Posted by Ravage70
stock injectors with boosT?
are u sure u arent running super lean?
are u sure u arent running super lean?
also who said anything about a 450 map.
#9
Re: help please help car runs but
Originally Posted by skittersk8er
stock everything rite now.
Originally Posted by skittersk8er
iv seen my plugs running rich as hell and my we crushed my stock fuel pressure reg. and got 10psi more out of it. i think that is one of the reasons as i didnt tell john when he made the base map.