help me, I think my turbo is going to blow soon.
Hey guys, I have a D15b7 and I am boosting at 8lbs right now, and here are my following mods:
HF manifold w/ adapter plate Big 16g starion intercooler w/ all necessary piping 1g bov rx-7 460cc injectors afc arp headstuds stainless steal headgasket all oil lines and what not My question is, there's a little bit of oil build up coming from the compressor side housing by where my 2g j-pipe is connected. I can hear very subtle metal on metal when in very low rpms in first and second gear, so I'm thinking that my seals are beginning to go on me. How can I check to make sure that this is exactly what's wrong with the turbo? Should I take off the compressor housing and take a look at the seals? Any help would be greatly appreciated, thanks in advance. |
Re: help me, I think my turbo is going to blow soon.
CDM? ;)
|
Re: help me, I think my turbo is going to blow soon.
Originally Posted by imburne
CDM? ;)
|
Re: help me, I think my turbo is going to blow soon.
Measure the shaft play in the turbo.
|
Re: help me, I think my turbo is going to blow soon.
Originally Posted by projecthatch92
this is such a noob question, but what is CDM?
|
Re: help me, I think my turbo is going to blow soon.
Originally Posted by QikEnuF
Chinese Domestic Market, aka Ebay Turbo.. As in are you running an eBay knock off. If so, your seals are probably blown.. I'd shoot Blaast (sponsor on here) a pm to see what he can do about a rebuild for it.
|
All times are GMT -5. The time now is 10:56 PM. |
© 2024 MH Sub I, LLC dba Internet Brands