All i know is that its off a renault 18 turbo............

If anyone could help id be very greateful, its going on a d16z6, id like to know what psi the wastegate is set at, and general thoughts on suitability etc....?




Thanks in advance.

 

There is some numbers ill have to have a closer look then write them in here, i hope the wastegate is set to 8psi (fingers crossed)

BTW its 3.20pm

 

On the exhaust housing= 22KO
Back of inlet housing is= 7.700.671.051
= 465544-2
=AC0184
Oil inlet= a
outlet= m/w depending on what way round it is, thats all i can find at the minute.

 

def looks like a .42/.48 t3... great turbo for a stock z6... made 217 whp @ 10.5 on one... it looked nearly identical to that one

 

Funnny ive just been reading about your new turbo and thought 217whp is a bit more than what im aiming for lol, ill be more than happy if i can get 170whp.
Hopefully its the same as your old one!

 

yeah.. it looks it... although it maybe a 45 trim instead of the 50 trim mine is... either way... both will get you your goals

 

Nice thanks for the help, ive still got a lot of ---- to gather before i can start fitting stuff, and i need to find someone to do some welding,
So far up to now for the turbo, intercooler, dump valve, steel plate for adapter its cost like £75 english pounds. no bad considering i could get a half complete ebay kit for £600pound lol.

 

I got two of those thangs

Looks like .42 .48

I got mine out the boneyard for $50 off a saab