Help me choose the right one
#1
Help me choose the right one
alright guys here is the dirt on the motor
B18A1
polish crank
parts je pistons 81mm 9:1
eagle rods
big sleeves and o-ring
balance crank
head.portflow design harbor city california
...port and polish,valve job,mill,ferrea
valves,titanium retainers,duel crower valve springs
now i want to get it somewhere close to 350hp. I dont want to push lots of psi but i want good power for both street and strip.
Now turbo choices that i have.
Td06 16g turbo guy wants 300 bucks. brand new.
T3 Super 60, .60 compressor wheel, .60 AR compressor cover, .48 turbine side guy wanst 400 rebuilt
or maybe a rebuilt unit from westcoast. And if so, which one and what trims.
thx guys
B18A1
polish crank
parts je pistons 81mm 9:1
eagle rods
big sleeves and o-ring
balance crank
head.portflow design harbor city california
...port and polish,valve job,mill,ferrea
valves,titanium retainers,duel crower valve springs
now i want to get it somewhere close to 350hp. I dont want to push lots of psi but i want good power for both street and strip.
Now turbo choices that i have.
Td06 16g turbo guy wants 300 bucks. brand new.
T3 Super 60, .60 compressor wheel, .60 AR compressor cover, .48 turbine side guy wanst 400 rebuilt
or maybe a rebuilt unit from westcoast. And if so, which one and what trims.
thx guys
#2
Re: Help me choose the right one
www.cheapturbo.com
it might cost a little more, but they are brand new, if you have the money if you are willing to pay $400 for a used turbo you will pay $600 for a new imo. or go to westcoast turbo
it might cost a little more, but they are brand new, if you have the money if you are willing to pay $400 for a used turbo you will pay $600 for a new imo. or go to westcoast turbo
Thread
Thread Starter
Forum
Replies
Last Post
bobafett
Forced Induction
2
01-09-2007 11:15 PM