limitlesstuners

Ive got a customers car in my shop in pieces and he's supplied me with the drag kit to fit the wrong year Integra. It would be helpful if someone that has a piping kit on a DA could picture it and atleast post so I can see the way the kit needs to route. Or someone that has a kit they would sell please contact me asap. 828-773-2012. Thanks

jinxy

i dont think you should run a shop if you cant reroute charge pipe :1

RobertPadron

If you own a performance shop and are asking for this type of advice, you are in the wrong buisness. You should be able to fabricate all the pipping out of 5 to 6 180 degree mandrel bent tubbing using a welder and a chop saw. That's what a buddy of mine that has a shop did on my car and it looks mint.

limitlesstuners

I can fabricate the piping, I just wanted to see a pic or two of someone elses so I can get an idea.

idiot-stick

lol. you need the turbo to go to the intercooler, and then from the intercooler to the intake manifold. use your imagination.

G2TegGuy

From Im, go through the hole where the stock airbox was. Do a 90 bend and come out to the front. Do another 90 to the left towards FMIC. Come out of FMIC do a 90 bend into where the WW fluid res. goes(ww fluid will need to be related). Come up from that hole and do a 90 bend towards engine. Do another 90 bend down on top of the turbo.. There is a different way but you have to drill a hole in the front support.

SpankedYA!

You own a shop and can't run charge pipes?

MikeJ-2009

yO, watch out foe dem limitless tuNERZ, yO!!! hahah.

joebowlr21

it should read.....you own a shop?