HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Heads up guys, ALMOST killed my motor =( (https://www.homemadeturbo.com/forced-induction-7/heads-up-guys-almost-killed-my-motor-%3D-12572/)

GPoodle 11-29-2003 12:14 AM

Heads up guys, ALMOST killed my motor =(
 
This is somewhat of a heads-up post .....

I was comming home from shooting some pool with some friends, and I just happened to glance at my oil pressure gauge. While normally driving around 50mph, its about 60-75Psi, well I looked, and double looked and wholy fuckn ---- the gauge was bouncing between 0-25psi! I managed to get into a parking lot, popped the hood (keeping the engine running, I didnt know if it was an electrical manfunction) and checked the dip stick.
NO OIL LINE!
I looked on the ground and it was literally pouring out, and there was a trail of oil where I had driven into the parking lot. Anyway, I walked home, drove back with a flashlight, and TOUCHED the oil pressure sending unit for the gauge and it fell out. Well that sucked and now my cars just sitting in the middle of a parking lot somewhere =(
I'm not gonna be able to fix it until tomarrow at like 3pm cause I work from 6am-2pm and Im worried about it sitting there overnight =(


Anyway, just a heads up.... guys check your sending units regularly and I'd really recommend relocating them to the firewall, thats what I'll be doing.

Hopefully no damage was done, I drove a few miles with low oil pressure before noticing it :hammer:

turbohf 11-29-2003 02:03 AM

Re:Heads up guys, ALMOST killed my motor =(
 
the brass break or the sensor its self?

shortyz 11-29-2003 04:17 AM

Re:Heads up guys, ALMOST killed my motor =(
 
eeeeeek

GPoodle 11-29-2003 05:37 AM

Re:Heads up guys, ALMOST killed my motor =(
 
No the sensor itselve managed to unscrew itselt. I'd read things about NOT putting it on the block because of all the vibration, but figured if I tightened it is hard as I could there wouldnt be a problem....well ::)

Turbo90Accord4DR 11-29-2003 05:39 AM

Re:Heads up guys, ALMOST killed my motor =(
 

Originally Posted by GPoodle
....well ::)

You probably stripped it.

cua0 11-29-2003 10:01 AM

Re:Heads up guys, ALMOST killed my motor =(
 
threadlock is pretty cool ----.

88crxSi 11-29-2003 01:15 PM

Re:Heads up guys, ALMOST killed my motor =(
 
http://www.theoldone.com/articles/oilpressure/

same thing happened to me. I made a smoke trail behind my car where ever i went. I seen oil dripping from the connection. I touched the sender and it almost fell out. it has since been relocated to the IM via a zip tie. 1 year later and no leaks.


All times are GMT -5. The time now is 12:17 PM.


© 2024 MH Sub I, LLC dba Internet Brands