headgasket for a d16a6
im looking to get a cometic hp gasket for an a6. i was just wondering what thickness is reasonable. i'd like to lower the compression a bit. go for 9:1 or something.
i've been looking into it and i've heard that .043 is pretty thick, but i was under the impression the stock a6 gasket was .048? so should i get the .043 or the .057? |
Re:headgasket for a d16a6
get a mr gasket mls stackable for a d16z6 that swhat im running in my y7/y8 mini me
|
Re:headgasket for a d16a6
I'd like to get an HP gasket because of the 'fire ring.' since i wont be building the engine at all.
|
Re:headgasket for a d16a6
if your not building the motor, stock comp is 9.2:1 i would leave it/ if anything you need a stock z6 or y8 meatal gasket
|
Re:headgasket for a d16a6
listen buddy, i dont mean to be a dick. but the stock compression ratio is 9.1:1 anyone with an a6 knows this. you obviously do not. with a z/y gasket, i would be raising the compression ratio, not exactly what i want to do. hell it's the complete opposite of what i want to do.
i think i've decided on the .057 according to http://www.knology.net/~jediklc/D.htm this will yeild a ~8.9:1 ratio. thanks for not helping and stating false information. ::) |
Re:headgasket for a d16a6
man for the 100 bux you think its worth it to go frfom 9.1(9.2) to 8.9 ? nah.
|
Re:headgasket for a d16a6
set aside the compression ratio, the HP gasket should seal better than a stock one, simply because of the 'fire ring' idea they have.
|
Re:headgasket for a d16a6
i know everyone on here likes to name their projects. so lets call this one 'project safe.'
arp head studs - $110 -i should use new bolts anyways right? why not spend a bit more for something better. cometic hp gasket - $100 -i need a new headgasket (only the headgasket), since i just bought the engine, the guy i bought it from said he would give me the money for the headgasket set. i could use the extra gaskets, but why get a shitty gasket set (felpro) for 110 when i can get just the gasket for 100, and it's 7 times better than the shitty felpro paper ones. and since the OEM metal gaskets only raise compression, thats just stupid. now, 210 dollars. which i should get at least half reimbursed isnt that bad for what should be an indestructable engine at 7-8 psi. |
Re:headgasket for a d16a6
first of all you little fucker i had a a6 in my rex boosted for along time, second of all your not going to be running enough boost for it to even matter, 7-8 psi is chicken ----. so the metal hg is less chance of a blow out. at 7-8 psi you could stand to raise your compression.1 for more off boost respnose. i know more about turboing cars and building engines than you could ever wissh. eat my cock.
|
Re:headgasket for a d16a6
also arp studs wont make a ------ differenced at you state of performance tune....or lack there of.
|
All times are GMT -5. The time now is 11:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands