HomemadeTurbo - DIY Turbo Forum
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   h22 turbo question *pics of setup (https://www.homemadeturbo.com/forced-induction-7/h22-turbo-question-%2Apics-setup-69882/)

Tom-Guy 11-28-2006 10:49 AM
Re: h22 turbo question *pics of setup
 
You should have kept the plate, removed butterflies and shaft, sealled the plate shaft bores with set screws and RTV.

SpeedyJAY 11-28-2006 11:19 AM
Re: h22 turbo question *pics of setup
 
Post some more pics of your charge pipe routes....routing charge pipes through my prelude at this moment, and am confused if I should remove my washer fluid, or drop down above the powersteering cooler. Also.....did you reclock the cold side housing ? I have a chargepipe coming straight up, and may have clearance issues with the radiator hose.

Sorry about the off topic :S

dastinker8 11-28-2006 01:12 PM
Re: h22 turbo question *pics of setup
 
Originally Posted by Joseph Davis
You should have kept the plate, removed butterflies and shaft, sealled the plate shaft bores with set screws and RTV.
Yeah well the goal was to remove the butterflies.. Then cut out the middle webbing. Also pull the manifold and remove the webbing there.. so it was just a big chamber.. I ended up finishing the middle piece and missplaced it :( So now im back to pulling the manifold and getting this bitch sealed up.


Originally Posted by SpeedyJAY
Post some more pics of your charge pipe routes....routing charge pipes through my prelude at this moment, and am confused if I should remove my washer fluid, or drop down above the powersteering cooler. Also.....did you reclock the cold side housing ? I have a chargepipe coming straight up, and may have clearance issues with the radiator hose.

Sorry about the off topic :S
Yeah i turned the cold side downwards. I ended up drilling a 3"in hole in my frame piece and removed my windshield washer fluid res. It was a pain in the ass. Plus i had to get pusher fans cause the manfiold puts the turbo liike RIGHT next to my radiator. Ill get some more pics here soon.

jacob_kohler 11-28-2006 05:53 PM
Re: h22 turbo question *pics of setup
 
Nice setup man, just watch your compression.

Oscar 11-28-2006 11:52 PM
Re: h22 turbo question *pics of setup
 
o wow, not someone else that thinks high compression(10.6 is not even that high) is bad with turbo's. ::)

dastinker8 11-29-2006 12:46 AM
Re: h22 turbo question *pics of setup
 
Originally Posted by d112crzy
o wow, not someone else that thinks high compression(10.6 is not even that high) is bad with turbo's. ::)
lol.. yeah its not that high.


Anyways.. I did a compression test tonight and i hit 190 all accross the board. Haynes says optimum is 185 so looks like im good there. Just gonna have to do a leakdown i guess.

jacob_kohler 11-29-2006 01:56 PM
Re: h22 turbo question *pics of setup
 
Originally Posted by d112crzy
o wow, not someone else that thinks high compression(10.6 is not even that high) is bad with turbo's. ::)
hmm shallow and pedantic

jarebear667 11-29-2006 03:40 PM
Re: h22 turbo question *pics of setup
 
i will be watching this thread becuz i will be boosting my built h22 with 10.5 cr. hope for 500 hp. yay.

ososlohatch 11-29-2006 04:18 PM
Re: h22 turbo question *pics of setup
 
prolly feels slow becouse of the ching chang meow turbo

jacob_kohler 11-30-2006 11:14 AM
Re: h22 turbo question *pics of setup
 
Originally Posted by jarebear667
i will be watching this thread becuz i will be boosting my built h22 with 10.5 cr. hope for 500 hp. yay.
MMMkay


All times are GMT -5. The time now is 07:04 PM.
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands