Gross misfires (vid)(fixxed)
05-20-2007, 01:57 AM
#1
0.5 BAR
Thread Starter
Join Date: Feb 2006
Posts: 159
Gross misfires (vid)(fixxed)
So i went out to test my new ----, and when i give it WOT or even 3/4 around 5-6k RPM it just misfires really bad. If i go into it REALLY slow it will go to redline but even the sometimes it will misfire and i have to let of a little and then go back into throttle slowly.
im sure it has been answered. i searched but i suck at it.
Its a b18b on crome basemap on 11lbs, 255lph pump, 450s when i had it on 7 lbs with my last turbo it did fine WOT but now, i donno. Because ill watch my gauge and it will cutout at like 5lbs sometimes with the misfires.
Video of misfiring and the dumbass that almost pulls out in front of me.
http://youtube.com/watch?v=LQJE4Hz2k4Y
im sure it has been answered. i searched but i suck at it.
Its a b18b on crome basemap on 11lbs, 255lph pump, 450s when i had it on 7 lbs with my last turbo it did fine WOT but now, i donno. Because ill watch my gauge and it will cutout at like 5lbs sometimes with the misfires.
Video of misfiring and the dumbass that almost pulls out in front of me.
http://youtube.com/watch?v=LQJE4Hz2k4Y
?? Whats the Timing set at? Stuff we need to know to help out
05-20-2007, 02:17 AM
#3
0.5 BAR
Thread Starter
Join Date: Feb 2006
Posts: 159
Re: Gross misfires
its just sitting on a basemap i got from xenocron. im gaped to .44 or whatever stock hondas are. should i drop to .28?
WG spring is set to 11.47 psi
No i dont have a wideband, but im just kinda wondering why it didnt do this at 7 lbs but it is at 11
and as for timing, again im sure it is untouched.
i need to lern2tune. but i dont have that kind of time atm, or the equipment.
WG spring is set to 11.47 psi
No i dont have a wideband, but im just kinda wondering why it didnt do this at 7 lbs but it is at 11
and as for timing, again im sure it is untouched.
i need to lern2tune. but i dont have that kind of time atm, or the equipment.
05-21-2007, 04:06 PM
#5
0.5 BAR
Join Date: Jan 2007
Posts: 52
Re: Gross misfires (vid)
well being a base map that would probably be the reason right there . basemaps are not made to be ripped on there made to get you to tuning and threw tuning without detonating, and it would do it at 11psi because that would be more pressure than 7 i think that math works out...... yep it does. base maps arent usually good up in the teens usualy 7 or 8 psi. and if you have a base map your timing will be changed but moral of the story go get tuned !!!!!!!!!!!!!!
05-21-2007, 04:11 PM
#6
Guest
Posts: n/a
Re: Gross misfires
Originally Posted by emoretared
its just sitting on a basemap i got from xenocron. im gaped to .44 or whatever stock hondas are. should i drop to .28?
WG spring is set to 11.47 psi
No i dont have a wideband, but im just kinda wondering why it didnt do this at 7 lbs but it is at 11
and as for timing, again im sure it is untouched.
i need to lern2tune. but i dont have that kind of time atm, or the equipment.
WG spring is set to 11.47 psi
No i dont have a wideband, but im just kinda wondering why it didnt do this at 7 lbs but it is at 11
and as for timing, again im sure it is untouched.
i need to lern2tune. but i dont have that kind of time atm, or the equipment.
05-21-2007, 04:14 PM
#7
Guest
Posts: n/a
Re: Gross misfires
Originally Posted by Dmc1
Well you do need to drop those plug gaps down around .30 And at 11.5 wg setting your probably hitting the stock maps limits. You need a 2 bar map sensor and to get the car tuned
