Got my wastegate
wastegate pics on last post
|
Re: .63 stamp?
Clean the housing, it should be by the inlet. BTW no such thing as a 48/63 :P
|
Re: .63 stamp?
I know on my Nissan T3 it's about 3/4" a bellow the Inlet FLange of the Turbine housing and on the Center section side.
I have a pic somewhere if you really need it. |
Re: .63 stamp?
my .60/.63 had the stamp about 1/2" inside the intlet of the exhaust housing where the manifold connects
|
Re: .63 stamp?
ok well i just bought this turbo that was supposed to be a 60/48, but the id is grinded down. i will get some pics.
its off a nissan, and it is a Garrett. and the exhaust side is stamped .63 toward the inlet on the inside facing the compressor side. oh yeah i meant 42/63 also. my bad. matt |
Re: .63 stamp?
didn't the older Nissan's come with a 60/63?
|
Re: .63 stamp?
|
Re: .63 stamp?
^ if i were gonna use an external wastegate, would i still need the piece on the hot side that bolts onto the end. or can i just bolt up a flanged dp right upto the exhaust side in the last pic in the above post.
thanx matt |
Re: .63 stamp?
just bolt the flange right up to it, get a flange that blocks off the internal wg hole
|
Re: .63 stamp?
Same turbo as mine, but mine is brand new almost. It a .60/.63 actuaaly.
I am in the process of drawing up a Block off/ DP Flange for weir and he is going tomachine it. I m gonna use an Audi External. BlaastPerformance also carries them. |
Re: .63 stamp?
are you sure its a .60/63? cuz the compressor of my 52/48 looked much bigger? eh, maybe its because i havent seen it in a while oh well. got it freshly rebuilt with 0 miles for $190 shipped. not bad.
matt |
Re: .63 stamp?
Yup. Pic Takin from MJM Turbos. Plus I'vce found it Plenty of times online!!!
http://www2.propichosting.com/Images/500802/22.JPG I got a better Deal!! Powder Coated, Garret Overhual, 170 Shipped and got it in 2 days! I f you need parts, I have an extra one also. |
Re: .63 stamp?
cool, ill remember that.
matt |
Re: Got my wastegate
|
Re: Got my wastegate
delta creeper, nice pickup :X
|
Re: Got my wastegate
I have a creep gate too. Hopefully it doesn't creep.
|
Re: Got my wastegate
eh, i only need it to hold 7 psi.
|
Re: Got my wastegate
Originally Posted by 96_civ
eh, i only need it to hold 7 psi.
|
Re: Got my wastegate
delta creepers hold a solid 10-14psi
atleast they are consistant ;) |
Re: .63 stamp?
Originally Posted by bumblezc
I f you need parts, I have an extra one also.
|
Re: Got my wastegate
Originally Posted by AbaZ
delta creepers hold a solid 10-14psi
atleast they are consistant ;) matt |
Re: Got my wastegate
Could be a 60 trim .52/.63 like my 300zx turbo.. I noticed to 7 bolt discharge :D
|
All times are GMT -5. The time now is 07:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands