HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Got a free turbo...pics inside (https://www.homemadeturbo.com/forced-induction-7/got-free-turbo-pics-inside-81425/)

hondarex2323 08-13-2007 04:59 PM

Got a free turbo...pics inside
 
14 Attachment(s)
well this lady was giving away a 84 turbo 300zx motor so i called her and picked it up last weekend..i was really surprised that she just gave it away free, so :6 :6 to me....it has no shaft play and in not to bad of shape, the only thing broke was the wastegate arm......... i was told it was a T3 60 trim stage 1, but i wanna find out for sure what it is...
tell me what yall think..

Attachment 24982
Attachment 24983
Attachment 24984
Attachment 24985
Attachment 24986
Attachment 24987
Attachment 24988
Attachment 24989
Attachment 24990
Attachment 24991
Attachment 24992
Attachment 24993
Attachment 24994
Attachment 24995

Smith-02 08-13-2007 05:48 PM

Re: Got a free turbo...pics inside
 
exhaust inlet, will have the a/r stamped

compressor outlet, will have the a/r stamped

its garrett, it'll be stamped

D16Y8-Z6 08-13-2007 06:20 PM

Re: Got a free turbo...pics inside
 
Its a 60/63. I had the same 7 bolt turbo.
Pulled nice on the d15 @ the time.

hondarex2323 08-13-2007 06:37 PM

Re: Got a free turbo...pics inside
 

Originally Posted by D16Y8-Z6
Its a 60/63. I had the same 7 bolt turbo.
Pulled nice on the d15 @ the time.

did you have the same wastgate?if so what is the psi of the spring?
im going to put it on my b16crx

D15Bastard 08-13-2007 06:56 PM

Re: Got a free turbo...pics inside
 
Yeah I put that same turbo on a d15b in my rex. I went with an external wg. 7lbs spring.

pulled really well up top. Little laggy down low.


I was going to put that turbo on my b16, but sold the crx with the turbo on it.

HiProfile 08-14-2007 01:19 AM

Re: Got a free turbo...pics inside
 
I got my t3/t04b s-trim with that ex housing on it, with a nice crack in it :1

I can never remember, I think thats a 60trim t3 though - you'd have to measure the small diameter of the compressor to w/in 1/16" for us to ID it's trim. It should be a stage1 exhaust though.

good info came from:
http://www.redz31.com/turbofaq/turbo.faq.htm

Seems that its 6.8psi, ran on a car with NO bov, likely was close to overspinning all the time, and may have a coked-up shaft due to no water cooling. It also was on a non-intercooled 3.0L motor, meaning the exhaust probably glowed bright red anytime they boosted for more than an eye blink. Oddly enough, there are still some of the turbos that survived and are ran unbuilt.

RobertPadron 08-14-2007 08:09 PM

Re: Got a free turbo...pics inside
 
I got that same turbo on my 99 si at 10psi making 250hp. works like a champ. Doesn't spool up til around 4000 rpm, but awsome top end.

Zxc4 08-16-2007 02:19 PM

Re: Got a free turbo...pics inside
 
I had a a very similar setup on my b16 crx. was pretty nice, whats that going on??

hondarex2323 08-16-2007 02:37 PM

Re: Got a free turbo...pics inside
 

Originally Posted by Zxc4
I had a a very similar setup on my b16 crx. was pretty nice, whats that going on??

my b16 si rex lol.....

what was your hp? and where you using the stock wastgate?

bounce 08-16-2007 04:37 PM

Re: Got a free turbo...pics inside
 
compressor side is a t3 ar60 60 trim ( like super 60 )
blaast sell a lot of those combined to a .48 exhaust side

thats what im running.. 10 psi @ 3000 rpm

remove that actuator
any t3 will bolt straight up to the housing
http://upload2.postimage.org/304394/Photo_0050.jpg


All times are GMT -5. The time now is 04:38 PM.


© 2024 MH Sub I, LLC dba Internet Brands