Getting my ECU chipped by Xeno
 

I'm about to have my P28 chipped by Xeno and had a few questions. (Warning: Newbness inside)

He requires the following information:
What information you need to provide me for the basemap - turbo setups:

- Engine/Turbo Combination
- Injector Size/Brand used
- Fuel Pressure at idle (hose off)
- Rev Limiter settings (please specify, dont just say 'stock')
- Launch Control setting if desired
- Idle RPM (OBD1 only)
- VTEC activation RPM (if applicable)
- The stock ECU that came in your car (if it is different than the ECU you are providing)

***I need to know how get the fuel pressure at idle and what hose needs to be taken off while taking the reading***
***Someone please tell me what RPM my D16Z6 P28 activates at***
***Also what is my stock rev limiter set at for a 92 civic sedan D16Z6 P28***

---- I know I know "get a rope! DIAF! ------- noob!" ---- Help me out so I can get some more power out of my bitch. :8

Re: Getting my ECU chipped by Xeno
 

Fuel pressure: stock is 45psi I think
RevLimiter: make a choice. If you are vtec, you probably want to go 8500, if non-vtec like 7300
Vtec activation: I don't know

Seriously, those setting (last 2) are up to you. You can choose what you want. Depend on your application. To know your cutoff, go in your car rev till the revlimiter and you then know it ;)

Re: Getting my ECU chipped by Xeno
 

line off is probaly reffering to FPR vacuum line my guess,
Vtec engagement should be about 5200 stock setting,
Rev limit should be 7200.

Re: Getting my ECU chipped by Xeno
 

As low as 7200 on vtec? My b18 is 7300 stock :S

Re: Getting my ECU chipped by Xeno
 

single cams 7200 limit or leave them blank he will set it at stock

Re: Getting my ECU chipped by Xeno
 

I don't know much about single cam, but I tought it was similar on the rev part. I learn everyday. ;)

Re: Getting my ECU chipped by Xeno
 

Thanks for the help guys. I'm still a little confused about figuring out the FP at idle. Anyone know EXACTLY how to figure that out?

Re: Getting my ECU chipped by Xeno
 

Durrrr, maybe a fuel pressure gauge?

Re: Getting my ECU chipped by Xeno
 

Your a pretty warm and fuzzy guy Jon...anyone every tell you that? lol. :-* So you have finals that saturday we'll be up at Stevemode's pad? There might be a civic in my future if it works out right. :6

Re: Getting my ECU chipped by Xeno
 

So do I just take the hose off of the FPR and attach the gauge there? I've never fucked with anything dealing with the fuel pressure. Just stab me in the right direction so I can get this bitch ready to ship out. Jago :-*

Re: Getting my ECU chipped by Xeno
 

oh boy...you need to set up a fuel pressure gauge (on the actual fuel line, or where it bolts to the filter, etc)...and then watch the pressure when you take the vac line off the fpr ;)

edit: if your car is basically stock and has a stock fpr, just hunt around to find the stock pressure on the net

Re: Getting my ECU chipped by Xeno
 

::)

http://lukekailburn.com/fpgauge.html

Yea Henry I'll be busy studying that weekend, sucks.

Re: Getting my ECU chipped by Xeno
 

As you can see I'm a total :1 but I'm slowly learning from OG's here. Thanks a lot guys.

Re: Getting my ECU chipped by Xeno
 

stock honda fp should be 43.5 -45 psi

Re: Getting my ECU chipped by Xeno
 

thanks pooh

Re: Getting my ECU chipped by Xeno
 

found an example at jegs http://www.jegs.com/p/B&M/749971/10551/-1
anyone know where else you can get that banjo fitting? I'd love to pick one up at a local parts store if possible.