gasket or not?
 

I just recently got a t3/t4 turbo and making a downpipe, the flange did not come with any gaskets for the 5 bolt pattern, could I just use high temp silicone or some kind of gasket maker and call it good? or should I just get a gasket, the problem is I can't seem to find one for the 5-bolt turbo.

Re: gasket or not?
 

just get the gasket, you can run it without one but why not just run one? exhaust leaks suck ass :y. cool for dates because then you can just turn your heater on and she will pas out but other then that it sucks. just find out what car it came off then goto the dealer and ask them to order you one.

Re: gasket or not?
 

it is a turbonetics t3/t4, their website does not list a gasket for a 5-bolt patern, I think they call it a 5-bolt ford patern is it the same one of the ford t-3's?

Re: gasket or not?
 

try and email them, they should be able to guide you in the right way.

Re: gasket or not?
 

Ive always just made my own. Ive used both sheetmetal and currently using a coper one. You can just make a trace and then dremel one out.

Re: gasket or not?
 

Go to the parts store and buy a sheet of gasket paper for about 12 bucks, trace it and cut it and you have your self a fancy gasket, you will even have enough left over to make all sorts of other gaskets. O0

Re: gasket or not?
 

thanks for to input guys! I'll go look at getting some gasket making materials, after all this is HOMEMADE TURBO!!!

Re: gasket or not?
 

where do you get that copper gasket material?

Re: gasket or not?
 

http://www.roadraceengineering.com/f...andgaskets.htm
Scroll down to bottom of page

Re: gasket or not?
 

I've never had a problem not running a downpipe gasket