Full 2.5 or 3" DP for greddy td-04 15g?
 

Ok so In know Kteller and several other people/places make "off the elbow" DPs, does anyone make a true 2.5 or 3" DP for this turbo(eliminating that POS elbow)? or anyone know of place that sells the right flange so I can get one made?

currently the car has stock greddy elbow, stock greddy DP then a Kteller 2.5" mandrel bent exhaust. it spools up fairly quick(starts @ 3K, 5 PSi by 3500, 13 by 4100) but, I want it to spool up even faster and have even better power @ a lower PSi....gonna get it retuned @ maybe 8-10 PSI

Re: Full 2.5 or 3" DP for greddy td-04 15g?
 

You'd pick up a decent amount of spool rpm with a tubular elbow, as well as some power. weirTech has some posted in the fab forum, and he apparently still makes them.

Re: Full 2.5 or 3" DP for greddy td-04 15g?
 

im sure you could by a flange and some bends and work one out yourself.

Re: Full 2.5 or 3" DP for greddy td-04 15g?
 

I'm sure I could....if I only knew how to weld :(

Re: Full 2.5 or 3" DP for greddy td-04 15g?
 

bitch.

look at the welding on this site.

think half the people on here "know" how to weld.

they just hit it. and learn in the process.

Re: Full 2.5 or 3" DP for greddy td-04 15g?
 

Bingo! A nice cheap wire feed welder is a great place to start learning, and not that big of an investment either. Once you learn to weld, you'll never run out of things to weld up. :D

Re: Full 2.5 or 3" DP for greddy td-04 15g?
 

LOL

well, I'll go to harbor freight and check out there welder line up.....I would prefer to do it all in SS

Re: Full 2.5 or 3" DP for greddy td-04 15g?
 

find 3" tight radius weld el

Re: Full 2.5 or 3" DP for greddy td-04 15g?
 

hes fabing a downpipe not a manifold.

els would be mad thick.

just some 16ga mandrels would be fine.

or get hardcore and just buy a chunk of straight pipe and whitey bend the ---- out of it.

Re: Full 2.5 or 3" DP for greddy td-04 15g?
 

sch 10 is about the same as 12ga. and it would still be thinner then the crap casting