broketuner

Ok so In know Kteller and several other people/places make "off the elbow" DPs, does anyone make a true 2.5 or 3" DP for this turbo(eliminating that POS elbow)? or anyone know of place that sells the right flange so I can get one made?

currently the car has stock greddy elbow, stock greddy DP then a Kteller 2.5" mandrel bent exhaust. it spools up fairly quick(starts @ 3K, 5 PSi by 3500, 13 by 4100) but, I want it to spool up even faster and have even better power @ a lower PSi....gonna get it retuned @ maybe 8-10 PSI

HiProfile

You'd pick up a decent amount of spool rpm with a tubular elbow, as well as some power. weirTech has some posted in the fab forum, and he apparently still makes them.

the 13th round

im sure you could by a flange and some bends and work one out yourself.

broketuner

I'm sure I could....if I only knew how to weld

the 13th round

bitch.

look at the welding on this site.

think half the people on here "know" how to weld.

they just hit it. and learn in the process.

Slo_crx1

Bingo! A nice cheap wire feed welder is a great place to start learning, and not that big of an investment either. Once you learn to weld, you'll never run out of things to weld up.

broketuner

LOL

well, I'll go to harbor freight and check out there welder line up.....I would prefer to do it all in SS

Racintweek

find 3" tight radius weld el

the 13th round

hes fabing a downpipe not a manifold.

els would be mad thick.

just some 16ga mandrels would be fine.

or get hardcore and just buy a chunk of straight pipe and whitey bend the ---- out of it.

Racintweek

sch 10 is about the same as 12ga. and it would still be thinner then the crap casting