Forced Induction Custom FI Setup Questions

fmu question

Old Jun 5, 2006 | 07:18 PM
  #11  
VTteg's Avatar
0.0 BAR
 
Joined: May 2006
Posts: 23
Default Re: fmu question

Fabricate a solid plate to bolt between the turbo and manifold so the turbo never even sees any exhaust flow.
Old Jun 5, 2006 | 09:07 PM
  #12  
0b00st0's Avatar
0.0 BAR
 
Joined: May 2005
Posts: 0
Default Re: fmu question

Originally Posted by VTteg
Fabricate a solid plate to bolt between the turbo and manifold so the turbo never even sees any exhaust flow.
The point here is to prevent boost without making it difficult.

You ******** make ---- way way harder than it has to be.


Old Jun 6, 2006 | 01:40 AM
  #13  
Zeusfire69's Avatar
1.5 BAR
 
Joined: Dec 2002
Posts: 716
Default Re: fmu question

Originally Posted by VTteg
Fabricate a solid plate to bolt between the turbo and manifold so the turbo never even sees any exhaust flow.
Now what? take a look at what you just typed and tell me if the car would even start :1 DUH!
Old Jun 6, 2006 | 02:09 AM
  #14  
h22lude's Avatar
Thread Starter
0.5 BAR
 
Joined: Nov 2005
Posts: 70
Default Re: fmu question



i might just try and drive it and don't boost. i can't see passing on the highway being any fun though. i still think the best/safest way is to tow it. its just expensive. ive drove turbo cars before. i used to have a volvo s70 t5 and it was hard to keep out of boost and it didn't spool until around 3500. i could disconnect a charge pipe, but its a long ways for that.
Old Jun 6, 2006 | 04:06 PM
  #15  
strandmo's Avatar
0.5 BAR
 
Joined: Apr 2006
Posts: 133
Default Re: fmu question

Personally I would just look for a friend with a truck and an auto trailer. If you know someone who is willing to help ya out then I would do it that way. :P
Old Jun 6, 2006 | 04:40 PM
  #16  
h22lude's Avatar
Thread Starter
0.5 BAR
 
Joined: Nov 2005
Posts: 70
Default Re: fmu question

just rent a uhaul and park it in the back haha
Old Jun 6, 2006 | 05:30 PM
  #17  
drupie51013's Avatar
3.0 BAR
 
Joined: Jan 2005
Posts: 1,537
Default Re: fmu question

staying outnof b00st is up to your throttle control.
Old Jun 6, 2006 | 05:37 PM
  #18  
primercrx's Avatar
0.5 BAR
 
Joined: Feb 2006
Posts: 84
Default Re: fmu question

do what **** said and stop ------- complaing, open waste gate leave charge pipes on, even if you did get on it at you will olny build a couple pounds at redline, so stay down low and drive like you mom
Old Jun 6, 2006 | 05:44 PM
  #19  
SmellySOHC's Avatar
1.5 BAR
 
Joined: Oct 2004
Posts: 1,263
Default Re: fmu question

i think once you know what boost feels like and have driven iwth it before you'll know what everyone is talking about ... looks like you havent felt or driven a boosted car before
miss n00b booty
Old Jun 6, 2006 | 06:00 PM
  #20  
Anubis_4_99's Avatar
1.5 BAR
 
Joined: Dec 2005
Posts: 1,427
Default Re: fmu question

my previous setup built full boost (10-12psi) at 3500RPMS, i drive at about 70MPH and pass on the highway and never get into boost

it's called throttle control! just drive it and quite bitchin ya pansy

Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:32 AM.