First turbo setup. What are these spots on the turbo for?
#3
Re: First turbo setup. What are these spots on the turbo for?
Originally Posted by whiterice
1. water line
2. oil in
3. oil out
4. water line.
2. oil in
3. oil out
4. water line.
#5
Re: First turbo setup. What are these spots on the turbo for?
Oil CAN do the trick on it's own, but you have to allow for longer cool down times than with both. Also depends on how much hot air you shove through the turbo as well. The higher the psi, the hotter the air usually becomes. Nuthin for nuthin though, if ya got it, use it. Never hurts to have additional cooling.
#6
Re: First turbo setup. What are these spots on the turbo for?
running the water helps the turbo run a little cooler and last a little longer, but i wouldnt hesitate to just not use the water lines, its just another thing to break/fail in a high heat area around the turbo. Also most high performance turbos dont use water cooling either. Its a personal choice, you can do it either way
Thread
Thread Starter
Forum
Replies
Last Post
stillnoturbo
General Discussion
39
06-01-2007 09:11 AM
Chris Harris
Engine Management
91
10-24-2004 02:59 PM