First turbo project. Done. DA Teg. Back from the dead.
10 Attachment(s)
Ok so After a stupid oil leak, a blown compressor, and blown couplers, the Teg is done... For now.
This was a ghetto/budget build. Decided to take on a winter project. My very first turbo setup, it did 90% on my own. All used parts, new ---- is over rated. Thanks to all the help i got from HMT guys and g2ic.com turbo guide. 1990 Acura Integra GS w/blown motor $200 7lbs of boost obd0-obd1 jumper $100 chipped p28 on chrome tuned. $280 b18b swap from HMO $2000 Turbonetics gen 3 t3 $175 Re-reinforce turbo XS mani w/heatwrap $100 HMT Ram $50 3" DP Tial WG $50 Greddy type-s BOV $50 HKS front mount $50 eGay Nology wires $100 ngk plugs $20 Stealthmode oil line kit $50 dsm 450 blue tops $50 GSR Cable tranny (Came with swap) Gripforce F1 stage 2 clutch $175 Fidanza 12lb flywheel $50 REVO short shifter $25 2.5" charge piping w/couplers and T-clamps $100 ES suspension ALL the way around the car $200 KYB struts $175 "High quality" eGay coil overs :S $75 OBD1 LS distributor $100 Misc oil, coolant, and other crap $200 So thats about $4300 in the car. kinda scary to think about, but oh well, i like it. And it is a good daily. Dont see boost till around 3.5k if im on it. Attachment 27692 Attachment 27693 Attachment 27694 Attachment 27695 Attachment 27696 Attachment 27697 Attachment 27698 Attachment 27699 Attachment 27700 Attachment 27701 |
Re: First turbo project. Done. DA teg
looks good aside from the zip tied header wrap... :P
|
Re: First turbo project. Done. DA teg
Sweet setup , vids should be interesting O0
|
Re: First turbo project. Done. DA teg
Originally Posted by sliva001
looks good aside from the zip tied header wrap... :P
|
Re: First turbo project. Done. DA teg
Originally Posted by sliva001
looks good aside from the zip tied header wrap... :P
|
Re: First turbo project. Done. DA teg
Originally Posted by 2G6
Ninja-Edit. I was gonna ask you wtf is so wrong with zip-ties, but then I looked at the pics. It looks like Helen Keller herself did them.
|
Re: First turbo project. Done. DA teg
hoseclamps.
|
Re: First turbo project. Done. DA teg
very nice. i am also in the middle of my turbo setup which is my 1st one. and its also a DA. Mine is a 91 LS-S. how does 7 psi feel. I was thinking i was gonna get a 7psi spring or up it to an 8psi spring in my wastegate once i bought it. Let me thanks man....
|
Re: First turbo project. Done. DA teg
What I find is really cool is if you go to a HF store if you have one. They have the same metal zipties that like DEI and places like that sell to hold the header wrap for a few bucks for a huge pack of them. Nice setup though.
|
Re: First turbo project. Done. DA teg
sweet, i have an ls turbo too.
and i rock that manifold. and it cracked a lot, just the supports off though. the runners havent cracked yet. make sure you reweld a ---- load of new braces if the ones on there fall off, just to save it. so far mine has been behaving for the 5k i have on it. |
All times are GMT -5. The time now is 10:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands