First turbo project. Done. DA Teg. Back from the dead.
#1
First turbo project. Done. DA Teg. Back from the dead.
Ok so After a stupid oil leak, a blown compressor, and blown couplers, the Teg is done... For now.
This was a ghetto/budget build. Decided to take on a winter project.
My very first turbo setup, it did 90% on my own. All used parts, new ---- is over rated.
Thanks to all the help i got from HMT guys and g2ic.com turbo guide.
1990 Acura Integra GS w/blown motor $200
7lbs of boost
obd0-obd1 jumper $100
chipped p28 on chrome tuned. $280
b18b swap from HMO $2000
Turbonetics gen 3 t3 $175
Re-reinforce turbo XS mani w/heatwrap $100
HMT Ram $50
3" DP
Tial WG $50
Greddy type-s BOV $50
HKS front mount $50
eGay Nology wires $100
ngk plugs $20
Stealthmode oil line kit $50
dsm 450 blue tops $50
GSR Cable tranny (Came with swap)
Gripforce F1 stage 2 clutch $175
Fidanza 12lb flywheel $50
REVO short shifter $25
2.5" charge piping w/couplers and T-clamps $100
ES suspension ALL the way around the car $200
KYB struts $175
"High quality" eGay coil overs $75
OBD1 LS distributor $100
Misc oil, coolant, and other crap $200
So thats about $4300 in the car. kinda scary to think about, but oh well, i like it. And it is a good daily.
Dont see boost till around 3.5k if im on it.
This was a ghetto/budget build. Decided to take on a winter project.
My very first turbo setup, it did 90% on my own. All used parts, new ---- is over rated.
Thanks to all the help i got from HMT guys and g2ic.com turbo guide.
1990 Acura Integra GS w/blown motor $200
7lbs of boost
obd0-obd1 jumper $100
chipped p28 on chrome tuned. $280
b18b swap from HMO $2000
Turbonetics gen 3 t3 $175
Re-reinforce turbo XS mani w/heatwrap $100
HMT Ram $50
3" DP
Tial WG $50
Greddy type-s BOV $50
HKS front mount $50
eGay Nology wires $100
ngk plugs $20
Stealthmode oil line kit $50
dsm 450 blue tops $50
GSR Cable tranny (Came with swap)
Gripforce F1 stage 2 clutch $175
Fidanza 12lb flywheel $50
REVO short shifter $25
2.5" charge piping w/couplers and T-clamps $100
ES suspension ALL the way around the car $200
KYB struts $175
"High quality" eGay coil overs $75
OBD1 LS distributor $100
Misc oil, coolant, and other crap $200
So thats about $4300 in the car. kinda scary to think about, but oh well, i like it. And it is a good daily.
Dont see boost till around 3.5k if im on it.
#5
Re: First turbo project. Done. DA teg
Originally Posted by sliva001
looks good aside from the zip tied header wrap... :P
#6
Re: First turbo project. Done. DA teg
Originally Posted by 2G6
Ninja-Edit. I was gonna ask you wtf is so wrong with zip-ties, but then I looked at the pics. It looks like Helen Keller herself did them.
#8
Re: First turbo project. Done. DA teg
very nice. i am also in the middle of my turbo setup which is my 1st one. and its also a DA. Mine is a 91 LS-S. how does 7 psi feel. I was thinking i was gonna get a 7psi spring or up it to an 8psi spring in my wastegate once i bought it. Let me thanks man....
#9
Re: First turbo project. Done. DA teg
What I find is really cool is if you go to a HF store if you have one. They have the same metal zipties that like DEI and places like that sell to hold the header wrap for a few bucks for a huge pack of them. Nice setup though.
#10
Re: First turbo project. Done. DA teg
sweet, i have an ls turbo too.
and i rock that manifold.
and it cracked a lot, just the supports off though. the runners havent cracked yet. make sure you reweld a ---- load of new braces if the ones on there fall off, just to save it. so far mine has been behaving for the 5k i have on it.
and i rock that manifold.
and it cracked a lot, just the supports off though. the runners havent cracked yet. make sure you reweld a ---- load of new braces if the ones on there fall off, just to save it. so far mine has been behaving for the 5k i have on it.