first HMT set-up, got some questions
07-11-2007, 10:19 PM
#1
0.5 BAR
Thread Starter
Join Date: May 2007
Posts: 69
first HMT set-up, got some questions
hey guys, first things first, this is by far the best site i've ever been on. you guys are really helpful and easy to talk to/work with. now, on with my setup...
Here is what i have in my possession as of now:
14b
hf manifold
starion intercooler w/ piping and 1g bov
oil lines with a t fitting
460cc rx-7 injectors
VAFC
1g o2 housing
1g downpipe w/ flexpipe and o2 bung
what i need still:
14b adapter plate (would rather buy one than make one)
water lines
arp headstuds
hondata headgasket
basically what i'm asking is how everything looks and what else you guys think i need. for the oil feed i'm going to tap into the oil pressure sensor, and the oil return into the oil pan. any help would be awesome, thanks again guys.
-Phil
Here is what i have in my possession as of now:
14b
hf manifold
starion intercooler w/ piping and 1g bov
oil lines with a t fitting
460cc rx-7 injectors
VAFC
1g o2 housing
1g downpipe w/ flexpipe and o2 bung
what i need still:
14b adapter plate (would rather buy one than make one)
water lines
arp headstuds
hondata headgasket
basically what i'm asking is how everything looks and what else you guys think i need. for the oil feed i'm going to tap into the oil pressure sensor, and the oil return into the oil pan. any help would be awesome, thanks again guys.
-Phil
07-11-2007, 10:28 PM
#3
1.5 BAR
Join Date: May 2007
Posts: 749
Re: first HMT set-up, got some questions
What is the point of this post?
You need some form of engine management or an FMU.
A Hondata head gasket is not the same as Hondata engine management. Come to think of it, it's a Hondata Intake Manifold Gasket, not a Head Gasket.
Why am I still typing...
You need some form of engine management or an FMU.
A Hondata head gasket is not the same as Hondata engine management. Come to think of it, it's a Hondata Intake Manifold Gasket, not a Head Gasket.
Why am I still typing...
07-11-2007, 10:33 PM
#4
3.0 BAR
Join Date: Feb 2006
Posts: 2,808
Re: first HMT set-up, got some questions
Originally Posted by klyph
What is the point of this post?
You need some form of engine management or an FMU.
A Hondata head gasket is not the same as Hondata engine management. Come to think of it, it's a Hondata Intake Manifold Gasket, not a Head Gasket.
Why am I still typing...
You need some form of engine management or an FMU.
A Hondata head gasket is not the same as Hondata engine management. Come to think of it, it's a Hondata Intake Manifold Gasket, not a Head Gasket.
Why am I still typing...
07-12-2007, 07:44 AM
#7
0.5 BAR
Thread Starter
Join Date: May 2007
Posts: 69
Re: first HMT set-up, got some questions
Originally Posted by klyph
What is the point of this post?
You need some form of engine management or an FMU.
A Hondata head gasket is not the same as Hondata engine management. Come to think of it, it's a Hondata Intake Manifold Gasket, not a Head Gasket.
Why am I still typing...
You need some form of engine management or an FMU.
A Hondata head gasket is not the same as Hondata engine management. Come to think of it, it's a Hondata Intake Manifold Gasket, not a Head Gasket.
Why am I still typing...
92 Civic hatch w/ d15b7. engine is good working condition. i did a compression test and had no issues.
why should i not worry about the water lines?
