First 10 sec D16 with vitaras..
Well no one thought these would reach this far but.. JFK78 just ran his first 2 10 sec runs with his d16 vitara piston setup.
Race weight 2300lbs on 100 octane. No wheelie bar, stock axles, stock head(except for a Zex Cam). http://img238.imageshack.us/img238/7586/1001238at6.jpg Videos: 10.99 run---> http://videos.streetfire.net/video/e...6500702e88.htm 10.89 run --->http://videos.streetfire.net/video/f...6500648401.htm He runs 75mm vitaras on stock sleeves. Car was driven to the track and left driving it also.. |
Re: First 10 sec D16 with vitaras..
glad to see this!!! cheap builds ftw
|
Re: First 10 sec D16 with vitaras..
nice!
|
Re: First 10 sec D16 with vitaras..
Good job!
|
Re: First 10 sec D16 with vitaras..
this is worse than WWII propaganda from a megaphone
|
Re: First 10 sec D16 with vitaras..
thats sweet, im suprised stock axle's take that abuse...lol
|
Re: First 10 sec D16 with vitaras..
Originally Posted by Ravage70
this is worse than WWII propaganda from a megaphone
Originally Posted by ososlohatch
thats sweet, im suprised stock axle's take that abuse...lol
ahh this makes me just want to run aroudn with a towel around my head and an ak47. :S whoever tuned it i give them a thumb up. |
Re: First 10 sec D16 with vitaras..
I'm curious as to the exact specifications of the setup...
|
Re: First 10 sec D16 with vitaras..
me too ^^^^^^^^^^
|
Re: First 10 sec D16 with vitaras..
im sure a h-t link will eventually be provided
|
Re: First 10 sec D16 with vitaras..
Originally Posted by ososlohatch
im sure a h-t link will eventually be provided
stock axles (from a corvette) stock head (with drunk portjob) |
Re: First 10 sec D16 with vitaras..
|
Re: First 10 sec D16 with vitaras..
Originally Posted by fjt
Well no one thought these would reach this far but.. JFK78 just ran his first 2 10 sec runs with his d16 vitara piston setup.
Race weight 2300lbs on 100 octane. No wheelie bar, stock axles, stock head(except for a Zex Cam). ell, I went to the track Friday night for the first time on slicks- I picked up some used 24.5 x 8.5 x 13 M&H slicks on lensos. They already had ~25 passes on them before this run. Car + driver weighs about 2300lbs. D16Y8, Vitaras, Eagle rods, Zex 59300, Skunk2 IM, H22 throttle body, stock port head, stock valvetrain, Ebay 50/63 57trim t3/t4, mini ram, 3" exhaust (I believe it's full), tuned by him on Crome Pro. These runs were open DP |
Re: First 10 sec D16 with vitaras..
ching chang meow turbo hits tens ??? wow
|
Re: First 10 sec D16 with vitaras..
wow props to tuner and driver! thats sick :) vitara piston slop ftw
-Luke |
Re: First 10 sec D16 with vitaras..
It was built, tuned and driven by himself..JFK78
|
Re: First 10 sec D16 with vitaras..
very impressive, do we have a dyno sheet? What hp at what psi? Im just realllllllyyy curious
|
Re: First 10 sec D16 with vitaras..
Originally Posted by ososlohatch
ching chang meow turbo hits tens ??? wow
I love my CDM |
Re: First 10 sec D16 with vitaras..
if you read the ht link somene says its an ebay turbo just wondering which ching chong was used
|
Re: First 10 sec D16 with vitaras..
50.63 54 trim or whatever it is, it had to have been rebuilt with garrett internals or it was a g pop shop rebuild
|
Re: First 10 sec D16 with vitaras..
Originally Posted by accordepicenter
very impressive, do we have a dyno sheet? What hp at what psi? Im just realllllllyyy curious
here its the link to his dyno thread. http://www.honda-tech.com/zerothread?id=1947857
Originally Posted by b33rnut010
if you read the ht link somene says its an ebay turbo just wondering which ching chong was used
|
Re: First 10 sec D16 with vitaras..
i bet it would be much over 500whp on a dynojet. But wow, thats really awesome
|
Re: First 10 sec D16 with vitaras..
Originally Posted by accordepicenter
i bet it would be much over 500whp on a dynojet. But wow, thats really awesome
Yea, the difference is greater than that IIRC. No doubt that's impressive. JP |
Re: First 10 sec D16 with vitaras..
what trany?
132mph in 3rd gear |
Re: First 10 sec D16 with vitaras..
Originally Posted by Zeniceguycrx
what trany?
132mph in 3rd gear |
Re: First 10 sec D16 with vitaras..
Originally Posted by Zeniceguycrx
what trany?
132mph in 3rd gear |
Re: First 10 sec D16 with vitaras..
Originally Posted by Minor Threat
stock Y8
|
Re: First 10 sec D16 with vitaras..
Definitely very impressive
|
Re: First 10 sec D16 with vitaras..
Originally Posted by fjt
443 whp and 323lbs/ft on a mustang dyno @ 28PSI (that would be around 460-470whp on a dyno jet)
here its the link to his dyno thread. http://www.honda-tech.com/zerothread?id=1947857 If im not wrong is one of the Master Power turbos out of ebay. T3/t4 57 trim Had to be a legit turbo. No way is that standard ching chong 57 trim gonna make over 300. It's not even a 57 trim wheel. It's about the size of a T3 60 trim. |
Re: First 10 sec D16 with vitaras..
ok what is the spec. is he using lsd.
what is all the details I'm thinking of biulding d16z w/ vitaras and eagle rod i keep seeing on ebay |
Re: First 10 sec D16 with vitaras..
read this whole post and you'll get most of the specifics
|
Re: First 10 sec D16 with vitaras..
Originally Posted by MADMAX
The dnyo sheets seem to have disappeared.
Had to be a legit turbo. No way is that standard ching chong 57 trim gonna make over 300. It's not even a 57 trim wheel. It's about the size of a T3 60 trim. But the d series heads flow so well they can make up for it ::). I call bs but thats just me. |
Re: First 10 sec D16 with vitaras..
Originally Posted by MADMAX
The dnyo sheets seem to have disappeared.
Had to be a legit turbo. No way is that standard ching chong 57 trim gonna make over 300. It's not even a 57 trim wheel. It's about the size of a T3 60 trim.
Originally Posted by chris
But the d series heads flow so well they can make up for it ::). I call bs but thats just me. |
Re: First 10 sec D16 with vitaras..
Originally Posted by Minor Threat
Call BS on what? |
Re: First 10 sec D16 with vitaras..
Originally Posted by sikcrx89
being a stock head with just a cam.. that head has some port work on it.
Hell, I have personally seen 404 on a mustang with no cam. |
Re: First 10 sec D16 with vitaras..
damn, thats good ----. makes me feel better about my build. i am hoping to be near 400whp on the same setup. i am gonna use the d15b cam though so probobly a little less
|
Re: First 10 sec D16 with vitaras..
B series man you think im a joke? I run the underdog single cam ---- bro!
|
Re: First 10 sec D16 with vitaras..
lmfao! there is soooo much mis information here about his setup lol
It IS a ssac t3/t4 .50/.63 57trim its the same ching chong meow t3/t4 turbo you see all over ebay...hasnt been rebuilt, just your run of the mill ssac. it was made on 28-29psi...yes he is using a stock y8 tranny, and no he didnt do 132 or w/e in 3rd gear lol, he does all his dyno pulls in 4th, he tunes it himself, he is one of the tuners for speedfactory in wa. his setup is very simple, y8 with eagles and vitaras, log mani with ssac turbo, zex cam, skunk2 im, h22 tb, 28psi. its a cookie cutter 400hp d-series. that runs 10's lol |
Re: First 10 sec D16 with vitaras..
not that i dont believe it but ill say it , idont believe those turbo's hit over 400 horsepower yet some kids blow them first run down the street, is he running super low oil pressure to it???? ... is there something he is doing to make it last?? ie had it balanced and is running low oil pressure, cause i've ran restrictor's with those turbo and still watch them blow seals like crazy. maybe he got the one good turbo they've made
|
Re: First 10 sec D16 with vitaras..
Originally Posted by fast2camciv
lmfao! there is soooo much mis information here about his setup lol
It IS a ssac t3/t4 .50/.63 57trim its the same ching chong meow t3/t4 turbo you see all over ebay...hasnt been rebuilt, just your run of the mill ssac. it was made on 28-29psi...yes he is using a stock y8 tranny, and no he didnt do 132 or w/e in 3rd gear lol, he does all his dyno pulls in 4th, he tunes it himself, he is one of the tuners for speedfactory in wa. his setup is very simple, y8 with eagles and vitaras, log mani with ssac turbo, zex cam, skunk2 im, h22 tb, 28psi. its a cookie cutter 400hp d-series. that runs 10's lol |
All times are GMT -5. The time now is 06:03 AM. |
© 2024 MH Sub I, LLC dba Internet Brands