Re: Finally finished my setup, take a look, lots of pics
 

that b7 @10psi is gonna own you. keep her low they suck for boost buddy of mine just granded a b7 @9.5 psi with no detionation

Re: Finally finished my setup, take a look, lots of pics
 

ahah same with my dad, dosent know ---- about turbos or anything about performance cars,

Re: Finally finished my setup, take a look, lots of pics
 

Do you know what turbo he was using? this teo4h is tiny so I'm thinking 10lbs should be fine, Hell tonight I made my homemade boost controller, http://www.geocities.com/chmwatson/FAQs/mbc.html, thought it was open all the way so it would only boost to 5 lbs, when I took it down the road, ecu control told me I was making 16.5 lbs, (dont know why, I didnt think the stock honda map read that high). Good thing my charge piping blew apart, It all seems to be fine.

Re: Finally finished my setup, take a look, lots of pics
 

it's not the size of the turbo it's the power and boost. and he was running a 14b we figured around 200whp or a little less.and a 14b is a bit bigger then a te04h if I am correct. and also if you ran 16psi for real you got lucky cause that motor will not take it.

Re: Finally finished my setup, take a look, lots of pics
 

whats with all these fancy resistor boxes lately? :P

Re: Finally finished my setup, take a look, lots of pics
 

I'm not sure what it was really at but it spiked hardcore and EcuControl said 16.5 lbs.

Yeah exactly so, I would think 10 lbs on this turbo would prolly make around 185whp, I'm keeping it rich (11.3ish:1) and the timing is pulled .9 per psi

Fancy? It cost me about $6 total, and I just didnt want those ugly resistors hanging out to feel the wrath of the elements.

Re: Finally finished my setup, take a look, lots of pics
 

I've been running it for a little over a week or so at 10 lbs with no problems, its running rich, (14.3:1 in vac, and 11.2:1 in boost). The wastegage arm keeps falling off the little flapper though because I didnt put the coder pin in (the old one broke off in the hole and wont come out), what can i stick on the peg that the arm goes over to keep that thing from falling off?

I'm still waiting for a reply on my stickers.

Re: Finally finished my setup, take a look, lots of pics
 

you could just go to the hardware store and buy a cotter pin or wrap wire through it.

Those teo4hs blow, I'm glad I sold mine, the down pipe was a complete bitch too.

Re: Finally finished my setup, take a look, lots of pics
 

i used a safety pin on mine.

Re: Finally finished my setup, take a look, lots of pics
 

holy ---- that's a clean budget setup. I'm lovin the resistor box, that looks mint. You guys did well.