SiTurboD

Alright so i finally got my ek boosted.. with a dsm t25 and so on .. well i went to start it up and it fired and like would try to get going but then wouldnt. So Darksol came over .. we swapped his chip in my ecu .. and it started and was semi drivable minus the bog/fuel cut at 3800 lol .. but when i would get on the gas.. my ------ oil pressure gauge would like go to about 70.. but then it would keep going as long as i was on the petal .. could this be the weird angle of my return line.. since im using an hf and an adaptor plate.. I cut the stealthmode return so if would reach better but it kinda squeezed in the middle not like a pinch thouh ..anyone have any ideas

B16Drag

use an oil restrictor... my oil pressure was in the 50-75 range and even higher than 100 before using the oil restrictor now it hangs around the 30-40's.

SiTurboD

a kinda needle restriction valve ? .. where can i get a restrictor?

B16Drag

Oh sorry. I thought I mentioned it but i th ink i was just thinking it. you can get it from Stealthmode.

SiTurboD

thanks

SiTurboD

hey is it just like the other tee i have .. so i can hook the oil pressure sender , my oil gauge and the oil feed to the turbo ?