external wastegate fittings
i just got an ebay tial style external wastegate! i'm not sure what the extra fitting is for ??? can somebody help a hmt member out? thanks :)
|
Re: external wastegate fittings
10mm x 1.0 is the fitting size for the real tial 38's....so i assume its the same for the knockoffs
http://www.tialsport.com/documents/w3_tial_38_dim.pdf |
Re: external wastegate fittings
It should come with 2 fittings. One for the top port and one for the side port.
|
Re: external wastegate fittings
What is the difference between top port and side port? thanks for help so far
|
Re: external wastegate fittings
Top = EBC
Lower/Side/Bottom = MBC JP |
Re: external wastegate fittings
can you explain better please!
|
Re: external wastegate fittings
Use the top port for an electronic boost controller, and the side port for a manual boost controller. Learn you some abbreviations, fool. O0
|
Re: external wastegate fittings
what if you dont use those items ::)
|
Re: external wastegate fittings
Originally Posted by Towdogg
what if you dont use those items ::)
Basically, at a specified boost level, the wastegate opens and diverts exhaust away from the turbo. This keeps you from building boost beyond whatever you set the tune at. Your wastegate has to know the boost level. It does this by reading pressure off of a vacuum/boost line. When the level of boost that your wastegate is set at (whatever spring is in it) is reached, the pressure in the vacuum line presses down the spring, opening the wastegate. So, if you don't use an MBC or EBC, your boost pressure will be your wastegate spring pressure. Just run a line from the nipple on the turbo to the side port of your WG. :S |
Re: external wastegate fittings
thanks for the info :6
|
All times are GMT -5. The time now is 11:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands